Article | Proceedings of the 10<sup>th</sup> International Modelica Conference; March 10-12; 2014; Lund; Sweden | Hardware In The Loop Simulation with Modelica - A Design Tool for Thermal Management Systems Linköping University Electronic Press Conference Proceedings
Göm menyn

Return to Index
Title:
Hardware In The Loop Simulation with Modelica - A Design Tool for Thermal Management Systems
Author:
Sidney Baltzer: Institute for Automotive Engineering (ika) – RWTH Aachen University, Aachen, Germany Thomas Lichius: Institute for Automotive Engineering (ika) – RWTH Aachen University, Aachen, Germany Jörg Gissing: Institute for Automotive Engineering (ika) – RWTH Aachen University, Aachen, Germany Peter Jeck: Institute for Automotive Engineering (ika) – RWTH Aachen University, Aachen, Germany Lutz Eckstein: Institute for Automotive Engineering (ika) – RWTH Aachen University, Aachen, Germany Jörg Küfen: Forschungsgesellschaft Kraftfahrwesen mbH, Aachen
DOI:
10.3384/ecp14096401
Download:
Full text (pdf)
Year:
2014
Conference:
Proceedings of the 10th International Modelica Conference; March 10-12; 2014; Lund; Sweden
Issue:
096
Article no.:
042
Pages:
401-408
No. of pages:
8
Publication type:
Abstract and Fulltext
Published:
2014-03-10
ISBN:
978-91-7519-380-9
Series:
Linköping Electronic Conference Proceedings
ISSN (print):
1650-3686
ISSN (online):
1650-3740
Publisher:
Linköping University Electronic Press; Linköpings universitet

Export in BibTex, RIS or text

Due to the higher complexity of electrified vehicles the requirements for vehicle components and vehicle design augment and new development tools are desirable. The following paper describes the design of a hardware-in-the-loop test-bench along with its structure using Modelica and an UDP interface. The aim is to support the development of components and operational strategies under realistic boundary conditions illustrated by the example of a waste heat recovery system. The test-bench is planned and built up within the scope of the public founded project qOpt at the Institute for Automotive Engineering (RWTH Aachen University) in cooperation with the Forschungsgesellschaft Kraftfahrwesen mbH Aachen and the Institute of Automatic Control (RWTH Aachen University).

Keywords: Hardware-in-the-loop simulation; thermal management; vehicle simulation; combined heat and power generation; waste heat recovery; electric vehicle; Plug-in hybrid vehicle; hermal storage

Proceedings of the 10th International Modelica Conference; March 10-12; 2014; Lund; Sweden

Author:
Sidney Baltzer, Thomas Lichius, Jörg Gissing, Peter Jeck, Lutz Eckstein, Jörg Küfen
Title:
Hardware In The Loop Simulation with Modelica - A Design Tool for Thermal Management Systems
DOI:
http://dx.doi.org/10.3384/ecp14096401
References:

[1] Bouvy C., Baltzer S., Jeck P., Lichius T., Gissing J., Eckstein L.: Holistic Vehicle Simulation using Modelica - An Application on Thermal Management and Operational Strategy for Electrified Vehicles. In: Proceedings of the 9th Modelica Conference 2012, Oberpfaffenhofen, Germany, Modelica Association, 3-5 September 2012.

[2] Biermann J.-W., Gnörich B.: From Micro to Full Hybrid - Two cars developed by fka and ika. In: International Automotive Congress 2008, Shenyang, China, 31 October 2008.

[3] Baltzer S., Lichius T., Gissing J., Jeck P., Küfen J., Barkow A., Eckstein L.: Hardware-inthe-Loop-Prüfstand zur Auslegung von Thermomanagementsystemen im PKW. In: Virtuelle Instrumente in der Praxis 2013. Mess-, Steuer-, Regel- und Embedded-Systeme - Begleitband zum 18. VIP-Kongress, Germany, 2013.

[4] Bouvy C., Gissing J., Lichius T.: Kühlsystementwicklung und Wärmemanagement für PlugIn-Hybridfahrzeuge. In: Proceedings of the E-MOTIVE Expertenforum „Elektrische Fahrzeugantriebe“, Aachen, Germany, 7-8 September 2011.

[5] Modelica Association (2013): Modelica Language Specification 3.2, www.modelica.org.

[6] National Instruments Labview, User Manual www.labview.com.

[7] National Instruments Veristand, User Manual www.veristand.com.

[8] National Instruments – Customizing the NI VeriStand Engine, NI Whitepaper 12640, 9th August 2013. www.ni.com.

[9] Daskin D. - Simple Method of DLL Export without C++/CLI, CodeProject 27th June 2009. www.codeproject.com.

[10] Mehling H., Cabeza L. F.: Heat and cold storage with PCM. An up to date introduction into basics and applications. Berlin, Germany, 2008.

[11] Strupp N. C., Lemke N.,: Klimatische Daten und Pkw-Nutzung: Klimadaten und Nutzungsverhalten zu Auslegung, Versuch und Simulation an Kraftfahrzeug-Kälte-/Heizanlagen in Europa, USA, China und Indien. Frankfurt a. Main, Germany, 2009.

Proceedings of the 10th International Modelica Conference; March 10-12; 2014; Lund; Sweden

Author:
Sidney Baltzer, Thomas Lichius, Jörg Gissing, Peter Jeck, Lutz Eckstein, Jörg Küfen
Title:
Hardware In The Loop Simulation with Modelica - A Design Tool for Thermal Management Systems
DOI:
https://doi.org10.3384/ecp14096401
Note: the following are taken directly from CrossRef
Citations:
  • Alberto Tejeda De La Cruz, Philippe Riviere, Dominique Marchio, Odile Caure & Anamaria Milu (2017). Hardware in the loop test bench using Modelica: A platform to test and improve the control of heating systems. Applied Energy, 188: 107. DOI: 10.1016/j.apenergy.2016.11.092
  • Elavarasan Dharumaseelan, Anand Pitchaikani, Elanchezhian Tamilselvam, Peter Sundstro & Sidharth Malik (2019). Multi‐objective modeling and analysis of an electric pickup vehicle for range, performance, drivability, handling and ride comfort attributes. INCOSE International Symposium, 29(S1): 138. DOI: 10.1002/j.2334-5837.2019.00675.x
    •


    Responsible for this page: Peter Berkesand
    Last updated: 2019-11-06