Article | Proceedings of the 10<sup>th</sup> International Modelica Conference; March 10-12; 2014; Lund; Sweden | Implementation of a Modelica Library for Simulation of Electromechanical Actuators for Aircraft and Helicopters Linköping University Electronic Press Conference Proceedings
Göm menyn

Return to Index
Title:
Implementation of a Modelica Library for Simulation of Electromechanical Actuators for Aircraft and Helicopters
Author:
Franciscus L.J. van der Linden: German Aerospace Center (DLR), Institute of System Dynamics and Control, Weßling, Germany Clemens Schlegel: Schlegel Simulation GmbH, Freising, Germany Markus Christmann: EADS Innovation Works, Munich, Germany Gergely Regula: MTA SZTAKI, Budapest, Hungary Chris I. Hill: University of Nottingham, Aerospace Technology Centre, Innovation Park, Nottingham, UK Paolo Giangrande: University of Nottingham, Tower Building, University Park, Nottingham, UK Jean-Charles Maré: Institut National des Sciences Appliquåes, Toulouse Cedex 4, France Imanol Egaña: IK4 TEKNIKER, Gipuzkoa, Spain
DOI:
10.3384/ecp14096757
Download:
Full text (pdf)
Year:
2014
Conference:
Proceedings of the 10th International Modelica Conference; March 10-12; 2014; Lund; Sweden
Issue:
096
Article no.:
079
Pages:
757-766
No. of pages:
10
Publication type:
Abstract and Fulltext
Published:
2014-03-10
ISBN:
978-91-7519-380-9
Series:
Linköping Electronic Conference Proceedings
ISSN (print):
1650-3686
ISSN (online):
1650-3740
Publisher:
Linköping University Electronic Press; Linköpings universitet

Export in BibTex, RIS or text

The goal of the A2015 library presented in this paper is to develop a Modelica based; tool-independent standard for electromechanical actuators (EMA). This will contribute to the establishment of a "common language" throughout the development of EMAs for aircraft and helicopters and through the supply chain. All stages of the design and validation process (conceptual design; specification; development and validation) are covered. The modeling ap-proach addresses specific aspects of the EMA design process not covered by existing tools. The library scope; engineering need and implementation are described. Modeling of selected EMA components is discussed in more detail. An application example of the library is given (linear actuator; A320 aileron).

Keywords: Actuator; EMA; Library; Multi Physics

Proceedings of the 10th International Modelica Conference; March 10-12; 2014; Lund; Sweden

Author:
Franciscus L.J. van der Linden, Clemens Schlegel, Markus Christmann, Gergely Regula, Chris I. Hill, Paolo Giangrande, Jean-Charles Maré, Imanol Egaña
Title:
Implementation of a Modelica Library for Simulation of Electromechanical Actuators for Aircraft and Helicopters
DOI:
http://dx.doi.org/10.3384/ecp14096757
References:

[1] www.actuation2015.eu

[2] www.modelica.org

[3] C.I. Hill, P. Giangrande, C. Gerada and S.V. Bozhko, Implementation of a Multi-Level Power Electronic Inverter in Modelica. In proceedings of the 10th Modelica Conference, 2014.

[4] N. Urasaki, T. Senjyu and K. Uezato, A Novel Calculation Method for Iron Loss Resistance Suitable in Modeling Permanent-Magnet Synchronous Motors, IEEE Transactions on Energy Conversion, vol. 18, no. 1, pp. 41-77, March 2003.

[5] D. Winkler and C. Gühmann, Modelling of Electrical Faults in Induction Machines Using Modelica, Proceedings in 48th Scandinavian Conference on Simulation and Modeling (SIMS), 2007.

[6] Maré J-C., 2-D Lumped parameters modelling of EMAs for advanced virtual prototyping of EMAs, Proceedings of Recent Advances in Aerospace Actuation Systems and Components, pp 122-127, Toulouse, France, June 13-14, 2012.

[7] Maré J-C., Friction modelling and simulation at system level: a practical view for the designer, ImechE part I, Journal of Systems and Control Engineering, Volume 226 Issue 6, pp. 728 - 741, July 2012.

[8] Otter M., Elmqvist H., Mattson S. E., Hybrid modelling in Modelica based on the synchronous data flow principle, 1999 IEEE Symposium on Computer-Aided Control System Design, pp. 151-157, August 22-26 Hawaii, USA, 1999.

[9] MSL: Modelica Standard Library, www.modelica.org/libraries [10] I. Réti, M. Lukátsi, B. Vanek, I. Gozse, Á. Bakos, J. Bokor, Smart mini actuators for safety critical unmanned aerial vehicles, 2nd International Conference on Control and Fault-Tolerant Systems (SysTol), Nice, France, 2013.

[11] Bünte, T., Recording of Model Frequency Responses and Describing Functions in Modelica. In: Proceedings of the 8th International Modelica Conference, Technical University Dresden, Germany (pp. 686–696), 2011.

[12] Linden, F. L. J. Van der, General fault triggering architecture to trigger model faults in Modelica using a standardized blockset. In proceedings of the 10th Modelica conference, 2014.

[13] Functional Mock-up Interface www.fmistandard. org

[14] M. Kuhn, M. Otter, and L. Raulin. (2008): A Multi Level Approach for Aircraft Electrical Systems Design. In: Proceedings of the 6th International Modelica Conference, Bielefeld, Germany, pp. 95-101, 2008.

Proceedings of the 10th International Modelica Conference; March 10-12; 2014; Lund; Sweden

Author:
Franciscus L.J. van der Linden, Clemens Schlegel, Markus Christmann, Gergely Regula, Chris I. Hill, Paolo Giangrande, Jean-Charles Maré, Imanol Egaña
Title:
Implementation of a Modelica Library for Simulation of Electromechanical Actuators for Aircraft and Helicopters
DOI:
https://doi.org10.3384/ecp14096757
Note: the following are taken directly from CrossRef
Citations:
  • Jean-Charles MARE (2019). Best practices for model-based and simulation-aided engineering of power transmission and motion control systems. Chinese Journal of Aeronautics, 32(1): 186. DOI: 10.1016/j.cja.2018.07.015
    •


    Responsible for this page: Peter Berkesand
    Last updated: 2019-11-06