Conference article

An Approach to Combine an Independent Metering System with an Electro-Hydraulic Flow-on-Demand Hybrid-System

M. Wydra
Karlsruhe Institute of Technology, Chair of Mobile Machines, Karlsruhe, Germany

M. Geimer
Karlsruhe Institute of Technology, Chair of Mobile Machines, Karlsruhe, Germany

B. Weiss
Weiss Mobiltechnik GmbH, Rohrdorf, Germany

Download articlehttp://dx.doi.org/10.3384/ecp17144161

Published in: Proceedings of 15:th Scandinavian International Conference on Fluid Power, June 7-9, 2017, Linköping, Sweden

Linköping Electronic Conference Proceedings 144:15, p. 161-170

Show more +

Published: 2017-12-20

ISBN: 978-91-7685-369-6

ISSN: 1650-3686 (print), 1650-3740 (online)

Abstract

By combining an electro-hydraulic flow-on-demand system with an independent metering of the actuators in- and outlet, a higher efficiency and a better controllability compared to conventional hydraulic-mechanic load sensing systems can be reached. It also enables the integration of a hydraulic accumulator to recuperate energy due to active loads. This paper presents an alternative control strategy for this kind of hydraulic propulsion systems. Connected with the pump and during passive loads the meter-in flow controls the velocity of the actuator. Otherwise the velocity control is achieved by the meter-out flow while the oil flows into the accumulator or tank. Exemplary this system is simulated for a mobile forestry crane. Further steps are building up a test bench for optimization and validation as well as an implementation into a real machine for testing the suitability in use.

Keywords

Flow-on-demand, independent metering, control, recuperation, hybrid system

References

[1] Shelley Nation and Aaron Jagoda. Smart Machines. Ivt International Off-Highway 2017, pages 72–74, 2017.

[2] Martin Scherer. Beitrag zur Effizienzsteigerung mobiler Arbeitsmaschinen: Entwicklung einer elektrohydraulischen Bedarfsstromsteuerung mit aufgeprägtem Volumenstrom. PhD thesis, Karlsruhe, 2015. Zugl.: Karlsruhe, KIT, Diss., 2015.

[3] Dieter Will. Hydraulik : Grundlagen, Komponenten, Schaltungen. SpringerLink : Bücher. Springer Berlin Heidelberg, 2011.

[4] M. Axin. Fluid Power Systems for Mobile Applications with a Focus on Energy Efficiency and Dynamic Characteristics. PhD thesis, Linköping University, Linköping, Sweden, 2013.

[5] A. Sitte and J. Weber. Structural design of independent metering control systems. pages 261–270. Proceedings of the 13 th Scandinavian International Conference on Fluid Power, Linköping, Sweden 2013.

[6] Ruqi Ding, Bing Xu, Junhui Zhang, and Min Cheng. Bumpless mode switch of independent metering fluid power system for mobile machinery. In Automation in Construction 68, pages 52–64. 2016.

[7] P. Nagel. Entwicklung einer Betriebsstrategie zur Energierückgewinnung in hybriden Mehrverbrauchersystemen. PhD thesis, Karlsruhe, 2016.

[8] P. Thiebes. Hybridantriebe für mobile Arbeitsmaschinen: grundlegende Erkenntnisse und Zusammenhänge, Vorstellung einer Methodik zur Unterstützung des Entwicklungsprozesses und deren Validierung am Beispiel einer Forstmaschine. PhD thesis, Karlsruhe, 2012. Zugl.: Karlsruhe, KIT, Diss., 2011.

[9] Jan Siebert and Marcus Geimer. Entwicklung eines effizienzgesteigerten Load-Sensing-Systems für mobile Arbeitsmaschinen durch Reduzierung systembedingter Druckverluste. In 9. Kolloquium Mobilhydraulik: Karlsruhe, 22./23. September 2016, pages 11–27. KIT Scientific Publishing, Karlsruhe, sep 2016.

[10] Dietmar Findeisen. Ölhydraulik : Handbuch für die hydrostatische Leistungsübertragung in der Fluidtechnik. VDI-[Buch]. Springer, Berlin, 5., neu bearb. aufl. edition, 2006.

[11] Wolfgang Backé, Gerd-Dieter Wobben, and Elmar Wassenberg. Untersuchungen des stationären und dynamischen Verhaltens mechanisch und elektrisch vorgesteuerter Druckbegrenzungsventile. Forschungsberichte des Landes Nordrhein-Westfalen ; 2811 : Fachgruppe Maschinenbau, Verfahrenstechnik. Westdt. Verl., Opladen, 1979.

[12] Wolfgang Backé, Nicolae Hamburger, and Hans-Peter Riedel. Untersuchungen über das dynamische Verhalten von Stromregelventilen. Forschungsberichte des Landes Nordrhein-Westfalen ; 2435. Westdt. Verl., Opladen, 1974.

[13] ZhimingWu. Einbindung einer hydraulischen Rekuperationseinheit in ein elektr.-hydr. Bedarfsstromsystems mit getrennten Steuerkanten. Master’s thesis, Karlsruhe Instiute of Technology - KIT, January 2017.

[14] P. Thiebes and T. Vollmer. Modellierung des Fahrers zur Untersuchung von Antriebssträngen in der 1DSimulation am Beispiel eines Radladers mit Hybridantrieb. In Tagungsband zur 3. Fachtagung Hybridantriebe für mobile Arbeitsmaschinen, pages 47–59, Karlsruhe, 2011.

Citations in Crossref