Conference article

Study of Energy Losses in Digital Hydraulic Multi-Pressure Actuator

Mikko Huova
Laboratory of Automation and Hydraulic engineering, Tampere University of Technology, Tampere, Finland

Arttu Aalto
Laboratory of Automation and Hydraulic engineering, Tampere University of Technology, Tampere, Finland

Matti Linjama
Laboratory of Automation and Hydraulic engineering, Tampere University of Technology, Tampere, Finland

Kalevi Huhtala
Laboratory of Automation and Hydraulic engineering, Tampere University of Technology, Tampere, Finland

Download articlehttp://dx.doi.org/10.3384/ecp17144214

Published in: Proceedings of 15:th Scandinavian International Conference on Fluid Power, June 7-9, 2017, Linköping, Sweden

Linköping Electronic Conference Proceedings 144:21, p. 214-223

Show more +

Published: 2017-12-20

ISBN: 978-91-7685-369-6

ISSN: 1650-3686 (print), 1650-3740 (online)

Abstract

A digital hydraulic multi-pressure actuator is a new actuator concept, which aims at lowering energy losses and decreasing dynamic requirements of a prime mover in mobile hydraulic applications. The actuator consists of an integrated hydraulic accumulator, which serves as an energy storage and a number of asymmetric cylinders acting as discrete pressure transformers. Leak-free on/off-valves are used to direct flow from the discrete pressure transformers to the actuator. Input power is supplied by charging the local accumulator with a small fixed displacement pump. Thus, the actuator requires only mean input power, while the output power peaks can be multifold. This paper concentrates on studying the controllability of the actuator concept and analyses the power losses and their sources through experimental study. The energy losses of the concept are measured in a mobile hydraulic boom mock-up and compared to earlier measured losses of a load sensing proportional valve based system. The measurements show that up to 77 % of the losses can be avoided by using the new concept. Three controller types are studied numerically and experimentally and their effect on control resolution and energy efficiency is evaluated.

Keywords

Digital hydraulics, Integrated actuator, Multi-pressure system

References

[1] M Lindgren, and P-A Hansson. Effect of Transient Conditions on Exhaust Emission from two Non-road Diesel Engines. Biosystems Engineering, Vol 87, Issue 1, 2004.

[2] M Vukovic, R Leifeld and H Murrenhoff. STEAM – a hydraulic hybrid architecture for excavators. Proc. of 10th International Fluid Power Conference. 8-10 March, 2016, Dresden, Germany.

[3] K Schneider. Liebherr Pactronic® – Hybrid Power Booster, Energy Recovery and Increased Performance with Hybrid Power. Proc. of 8th International Fluid Power Conference. 26-28 March, 2012, Dresden, Germany.

[4] K Einola and A Kivi. First Experimental Results of a Hydraulic Hybrid Concept System for a Cut-to-Length Forest Harvester. Proc. of 14th Scandinavian International Conference on Fluid Power. 20-22 May, 2015, Tampere, Finland.

[5] P Achten and T van den Brink. A hydraulic transformer with a swash block control around three axis of rotation. Proc. of 8th International Fluid Power Conference, 26-28 March 2012, Dresden, Germany.

[6] H Kogler and R Scheidl. Energy Efficient Linear Drive Axis Using a Hydraulic Switching Converter. Journal of Dynamic Systems, Measurement and Control. 2016, Vol 138(9). doi: https://doi.org/10.1115/1.4033412.

[7] M Pan, J Robertson, N Johnston, A Plummer and A Hillis. Experimental investigation of a switched inertance hydraulic system. Proc. of ASME/Bath Symposium on Fluid Power and Motion Control 2014 (FPMC14). Bath, UK.

[8] C Williamson, J Zimmerman, and M Ivantysynova. Efficiency Study of an Excavator Hydraulic System Based on Displacement-Controlled Actuators. Proc of ASME/Bath Workshop on Fluid Power and Motion Control 2008 (FPMC08). Bath, UK.

[9] M Linjama, M Huova, M Pietola, J Juhala, and K Huhtala. Hydraulic Hybrid Actuator. Theoretical Aspects and Solution Alternatives. Proc. of The 14th Scandinavian International Conference on Fluid Power, May 20-22, 2015, Tampere, Finland.

[10] M Huova, A Aalto, M Linjama, K Huhtala, T Lantela, and M Pietola. Digital Hydraulic Multi-Pressure Actuator - the Concept, Simulation Study and First Experimental Results. International Journal of Fluid Power. https://doi.org/10.1080/14399776.2017.1302775.

[11] E Bishop. Digital Hydraulic Transformer – Approaching Theoretical Perfection in Hydraulic Drive Efficiency. Proc. of The 11th Scandinavian International Conference on Fluid Power, June 2-4, 2009, Linköping, Sweden.

[12] E Bishop. Linearization of Quantized Digital Hydraulic Transformer Output. Proc. of The Third Workshop on Digital Fluid Power, October, 13-14, Tampere, Finland.

[13] M Linjama, H-P Vihtanen, A Sipola, and M Vilenius. Secondary Controlled Multi-Chamber Hydraulic Cylinder. Proc. of The 11th Scandinavian International Conference on Fluid Power, June 2-4, 2009, Linköping, Sweden.

[14] A Harrison and D Stoten. Generalized Finite Difference Methods for Optimal Estimation of Derivatives in Real-Time Control Problems. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering 1995, Vol 209: 67–78.

[15] Hydac WS08W-01 datasheet. Available: www.hydac.com.br/wp-ontent/uploads/e5924_ws08w01.pdf. January 27th 2017.

[16] M Linjama, M Huova, P Boström, A Laamanen, L Siivonen, L Morel, M Walden and M Vilenius. Design and Implementation of Energy Saving Digital Hydraulic Control System. Proc. of The Tenth Scandinavian International Conference on Fluid Power, 2007, Tampere, Finland.

Citations in Crossref