Conference article

Water Hammer Induced Cavitation - A Numerical and Experimental Study

Marcus Jansson
Atlas Copco Rock Drills AB, SE-701 91 Örebro, Sweden

Magnus Andersson
Division of Applied Thermodynamics and Fluid Mechanics, Department of Management and Engineering, Linköping University, Sweden

Maria Pettersson
Atlas Copco Rock Drills AB, SE-701 91 Örebro, Sweden

Matts Karlsson
Division of Applied Thermodynamics and Fluid Mechanics, Department of Management and Engineering, Linköping University, Sweden

Download articlehttp://dx.doi.org/10.3384/ecp17144256

Published in: Proceedings of 15:th Scandinavian International Conference on Fluid Power, June 7-9, 2017, Linköping, Sweden

Linköping Electronic Conference Proceedings 144:25, p. 256-260

Show more +

Published: 2017-12-20

ISBN: 978-91-7685-369-6

ISSN: 1650-3686 (print), 1650-3740 (online)

Abstract

Cavitation erosion is one of the main concerns in hydraulic rock drills and can reduce both performance as well as life span. Current simulation tools can detect a potential risk of cavitation, however, the equations do not include cavitation physics and therefore cannot estimate the severity nor erosion locations. In order to evaluate the cavitation damage, long term tests are performed which are both costly and time consuming. With better computational capacity and more accurate numerical flow models, the possibilities to simulate the course of cavitation have increased. So far, most numerical studies on cavitation focus on steady-state problems while studies on hydraulic transients and water hammer effects have received less attention. This paper is a step towards simulation of water hammer induced cavitation and cavitation erosion in pipe flow using Computational Fluid Dynamics (CFD). In order to validate the results, experimental measurements are performed with a test equipment that creates hydraulic transients in a pipe and records these using piezoelectric pressure sensors. The results from CFD are compared to both the experimental data and to numerical results from a software called Hopsan, a one-dimensional multi-domain system simulation tool that uses wave characteristics to calculate pressures and flows. For smaller transients where no cavitation occur, all results show good agreement. For larger transients with cavitation, the results from Hopsan do not longer agree with the measurements, while the CFD model still performs well and is able to predict both formation and collapse of cavitation.

Keywords

Cavitation, Water hammer, Hydraulic transients, Rock drills, CFD

References

[1] T. Koivula. On cavitation in fluid power. In Proceedings of 1st FPNI-PhD Symposium, pages 371–382, Hamburg, 2000.

[2] N. Hedlund. Experimental simulation of cavitation erosion. Master’s thesis, KTH Royal Institute of Technology, 2014.

[3] J.-P. Franc and J.-M. Michel, editors. Fundamentals of Cavitation. Springer Science & Business Media, 2010.

[4] C. E. Brennen. Cavitation and Bubble Dynamics. Oxford University Press, 1995.

[5] C. E. Brennen. An introduction to cavitation fundamentals. In WIMRC FORUM 2011 – Cavitation: Turbomachinery & Medical Applications, University of Warwick, UK, 4-6 July 2011.

[6] K. H. Kim, G. Chahine, J.-P. Franc, and A. Karimi, editors. Advanced Experimental and Numerical Techniques for Cavitation Erosion Prediction. Springer, 2014.

[7] M. H. Chaudhry. Applied Hydraulic Transients. Springer, 2013.

[8] M. R. Nikpour, A. H. Nazemi, A. Hosseinzadeh Dalir, F. Shoja, and P. Varjavand. Experimental and numerical simulation of water hammer. Arabian Journal for Science and Engineering, 39(4):2669–2675, 2014.

[9] F.J. Salvador, J. Martínez-López, M. Caballer, and C. De Alfonso. Study of the influence of the needle lift on the internal flow and cavitation phenomenon in diesel injector nozzles by CFD using RANS methods. Energy Conversion and Management, 66:246–256, feb 2013.

[10] F. Brusiani, S. Falfari, and G. M. Bianchi. Definition of a CFD multiphase simulation strategy to allow a first evaluation of the cavitation erosion risk inside high-pressure injector. Energy Procedia, 81:755–764, dec 2015.

[11] S. I. Bernad and R. Susan-Resiga. Numerical model for cavitational flow in hydraulic poppet valves. Modelling and Simulation in Engineering, 2012:1–10, 2012.

[12] R. Amirante, E. Distaso, and P. Tamburrano. Experimental and numerical analysis of cavitation in hydraulic proportional directional valves. Energy Conversion and Management, 87:208–219, 2014.

[13] A. Peters, H. Sagar, U. Lantermann, and O. el Moctar. Numerical modelling and prediction of cavitation erosion. Wear, 338-339:189–201, sep 2015.

[14] T.-H. Shih,W.W. Liou, A. Shabbir, Z. Yang, and J. Zhu. A new k-e eddy-viscosity model for high reynolds number turbulent flows - model development and validation. Computers Fluids, 24(3):227–238, 1995.

[15] G. H. Shnerr and J. Sauer. Physical and numerical modeling of unsteady cavitation dynamics. In Fourth International Conference on Multiphase Flow, New Orleans, USA, 2001.

Citations in Crossref