Wasakron Treedet
Department of Mechanical Engineering, Faculty of Engineering, Khon Kaen University, Khon Kaen, Thailand
Ratchaphon Suntivarakorn
Department of Mechanical Engineering, Faculty of Engineering, Khon Kaen University, Khon Kaen, Thailand
Download article
http://dx.doi.org/10.3384/ecp11057140Published in: World Renewable Energy Congress - Sweden; 8-13 May; 2011; Linköping; Sweden
Linköping Electronic Conference Proceedings 57:19, p. 140-147
Published: 2011-11-03
ISBN: 978-91-7393-070-3
ISSN: 1650-3686 (print), 1650-3740 (online)
The objective of this work was to study bio-oil production from sugar cane trash by a pyrolysis process in fluidized bed reactor. The experiments were carried out at different temperatures ranging from 460 – 540 oC and at different medium gas flow rates between 120 -160 cc.s-1. Two different gases; Nitrogen (N2) and air; were used as the fluidizing medium in order to study the effect of a different medium on the yield and properties of the bio-oil. The experimental result showed that the maximum bio-oil yields of 46.2 wt% and 31.95 wt% were obtained at 500 oC and 160 cc.s-1 for air and Nitrogen medium; respectively. The bio-oil yield obtained when using air as a medium was higher than that when using Nitrogen medium. This was a result of the higher quantity of water content in the air. The properties of bio-oil were determined and the result showed that its heating value; dynamic viscosity; density; water content; and pH were 15.48 MJ.kg-1; 2.31 cSt 1;019 kg.m-3; 52 wt% and 3; respectively. By dehydration of the obtained bio-oil; the heating value; viscosity and density were increased to 19.81 MJ.kg-1; 57.66 cSt and 1;260 kg.m-3; respectively. These results show that the bio-oil can be used as a fuel oil for combustion in a boiler or a furnace without any modification. Furthermore; the energy consumption of the pyrolysis process was analyzed.
[1] NEPO (National Energy Policy Office) Journal Volume 50 [online] 2000 [cited 2009 Dec. 7]. Available from : http://www.eppo.go.th/vrs/VRS50-03- FutureFuel.html
[2] M. Asadullah; M.A. Rahman; M.M. Ali; M.A. Motin; M.B. Sultan; M.R. Alam and M.S. Rahman; Jute stick pyrolysis for bio-oil production in fluidized bed reactor; Bioresource Technology 99; 2008; pp. 44-50.
doi: 10.1016/j.biortech.2006.12.002.
[3] Z. Ji-lu; Y. Wei-ming and W. Na-na; Bio-oil production from cotton stalk; Energy Conversion and Management 49; 2008; pp.1724–1730.
doi: 10.1016/j.enconman.2007.11.005.
[4] S. Wang; M. Fang; C. Yu; Z. Luo and K. Cen; Flash Pyrolysis of biomass particles in fluidized bed for bio-oil production; China Particuology 3 (1-2); 2005; pp.136 – 140.
doi: 10.1016/S1672-2515(07)60181-X.
[5] Z. Ji-lu; Bio-oil from fast pyrolysis of rice husk: Yields and related properties and improvement of the pyrolysis system; Journal of Analytical and Applied Pyrolysis 80; 2007; pp.30 – 35.
doi: 10.1016/j.jaap.2006.12.030.
[6] M.F. Parihar; M. Kamil; H.B. Goyal; A.K. Gupta and A.K. Bhatnagar; An experimental study on pyrolysis of biomass; Trans IChemE Part B 85; 2007; pp.458–465.
doi: 10.1205/psep07035.
[7] M. Asadullah; M.A. Rahman; M.M. Ali; M.S. Rahman; M.A. Motin; M.B. Sultan and M.R. Alam; Production of bio-oil from fixed bed pyrolysis of bagasse; Fuel 86; 2007; pp. 2514-2520.
doi: 10.1016/j.fuel.2007.02.007.
[8] S. Sensoz; D. Angin; Pyrolysis of safflower (Charthamus tinctorius L.) seed press cake in a fixed-bed reactor: Part 2. Structural characterization of pyrolysis bio-oils; Bioresource Technology 99; 2008; pp.5498 – 5504.
doi: 10.1016/j.biortech.2007.11.004.
[9] A.V. Bridgwater; Biomass fast pyrolysis; Thermal Science 8(2); 2004; pp.21-49. doi: .