P. Zhang
Institute of Refrigeration and Cryogenics, Shanghai Jiao Tong University, China
L. Xia
Institute of Refrigeration and Cryogenics, Shanghai Jiao Tong University, China
R. Z. Wang
Institute of Refrigeration and Cryogenics, Shanghai Jiao Tong University, China
Download article
http://dx.doi.org/10.3384/ecp11057756Published in: World Renewable Energy Congress - Sweden; 8-13 May; 2011; Linköping; Sweden
Linköping Electronic Conference Proceedings 57:2, p. 756-763
Published: 2011-11-03
ISBN: 978-91-7393-070-3
ISSN: 1650-3686 (print), 1650-3740 (online)
The low thermal conductivity of phase change material (PCM) leads to low heat storage/retrieval rates. The expanded graphite (EG) was used to enhance the thermal conductivity. EG/paraffin composite with the 7% mass fraction of EG was prepared as a good candidate for the latent thermal energy storage (LTES) system. A shell and tube LTES system built for room heating and hot water supply in a family was experimentally investigated. The paraffin and paraffin/EG composite were used as the heat storage material; respectively. The experimental results indicated: The utilization of EG/paraffin composite PCM greatly improved the heat storage/retrieval rates of the LTES system. The LTES system with paraffin/EG composite showed a 44% reduction in heat storage duration and a nearly 69% reduction in the retrieval duration; respectively; compared to those for the system using pure paraffin. The most outstanding advantage; for the LTES system filled with paraffin/EG composite; was that the outlet temperature of water can be maintained at a higher level for a longer term than that with paraffin. However; the LTES system filled with EG/paraffin composite did not show an obvious advantage in the step-by-step heat retrieval mode; compared with paraffin.
Latent thermal energy storage; Paraffin/expanded graphite composite; Heat storage/retrieval rate
[1] G.A. Lane; Solar heat storage: latent heat materials; background and scientific principles vol. I. Florida: CRC Press Inc; 1983.
[2] A. Felix Regin; S.C. Solanki; J.S. Saini; Heat transfer characteristics of thermal energy storage system using PCM capsules: A review; Renewable and Sustainable Energy Reviews12; 2008; pp. 2438–2458.
doi: 10.1016/j.rser.2007.06.009.
[3] C. Arkar; B. Vidrihb; S. Medveda; Efficiency of free cooling using latent heat storage integrated into the ventilation system of a low energy building; International Journal of Refrigeration 30; 2007; pp. 134–143.
doi: 10.1016/j.ijrefrig.2006.03.009.
[4] A. Benmansour; M.A. Hamdan; A. Bengeuddach; Experimental and numerical investigation of solid particles thermal energy storage unit; Applied Thermal Energy 26; 2006; pp. 513–518.
doi: 10.1016/j.applthermaleng.2005.07.014.
[5] F. Agyenim; N. Hewitt; P. Eames; M. Smyth; A review of materials; heat transfer and phase change problem formulation for latent heat thermal energy storage systems (LHTESS); Renewable and Sustainable Energy Reviews 14; 2010; pp. 615–628.
doi: 10.1016/j.rser.2009.10.015.
[6] A. Trp; An experimental and numerical investigation of heat transfer during technical grade paraffin melting and solidification in a shell-and-tube latent thermal energy storage unit; Solar Energy 79; 2005; pp. 648–660.
doi: 10.1016/j.solener.2005.03.006.
[7] H.A. Adine; H.E. Qarnia; Numerical analysis of the thermal behaviour of a shell-and-tube heat storage unit using phase change materials; Applied Mathematical Modelling 33; 2009; pp. 2132–2144
doi: 10.1016/j.apm.2008.05.016.
[8] F. Agyenim; P. Eames; M. Smyth; A comparison of heat transfer enhancement in a medium temperature thermal energy storage heat exchanger using fins; Solar Energy 83; 2009; pp. 1509–1520.
doi: 10.1016/j.solener.2009.04.007.
[9] M. Esen; A. Durmus; Geometric design of solar-aided latent heat store depending on various parameters and phase change materials. Solar Energy 62; 1998; pp. 19–28.
doi: 10.1016/S0038-092X(97)00104-7.
[10] F. Agyenim; P. Eames; M. Smyth; Heat transfer enhancement in medium temperature thermal energy storage system using a multitube heat transfer array. Renewable Energy 35; 2010; pp. 198–207.
doi: 10.1016/j.renene.2009.03.010.
[11] A.A. Ghoneim; Comparison of theoretical models of phase-change and sensible heat storage for air and water-based solar heating systems; Solar Energy 42; 1989; pp. 209–220.
doi: 10.1016/0038-092X(89)90013-3.
[12] L. Xia; P. Zhang; R.Z. Wang; Preparation and thermal characterization of expanded graphite/paraffin composite phase change material; Carbon 48; 2010; pp. 2538-2548
doi: 10.1016/j.carbon.2010.03.030.