H. A. Ozgoli
Department of energy, science & research campus, Islamic Azad University, Tehran, Iran
H. Ghadamian
Department of energy, science & research campus, Islamic Azad University, Tehran, Iran
N. Andriazian
Department of energy, science & research campus, Islamic Azad University, Tehran, Iran
Download article
http://dx.doi.org/10.3384/ecp110571724Published in: World Renewable Energy Congress - Sweden; 8-13 May; 2011; Linköping; Sweden
Linköping Electronic Conference Proceedings 57:32, p. 1724-1731
Published: 2011-11-03
ISBN: 978-91-7393-070-3
ISSN: 1650-3686 (print), 1650-3740 (online)
This study has considered hybrid system SOFC/GT with the new approach. This cycle; as a power plant is designed to reduce losses and improve comprehensive cycle performance. In the first part cycle; fluidized bed system with biomass (wood chips) fuel using gas cleaning mechanism; produce combustible gases which are required fuel combustion chambers of steam reformer and the GT. Second part cycle; required hydrogen for SOFC system is supplied through external SR. In the third part; the treated bio syn-gas from the cleaning unit outlet; in conjunction with recycled exhaust gases of the cell’s anode will feed SR and GT combustors. In the fourth part cycle; flue gas would pass through heat recovery steam generator. Thus; high pressure and low pressure steams with values 3.39&0.45 ton/hr; respectively are generated. In this study; SOFC and GT with a capacity of 1000 & 750.81 kW respectively are designed. Overall efficiency of power production 74.4% is obtained. In comparison with similar study done in 2008 at the University of Delft; that overall 47% efficiency; increasing the efficiency of such systems has been viewed.
Solid Oxide Fuel Cell (SOFC); Gas Turbine (GT); Bio syn-gas; Fluidized Bed (FB); Steam Reformer (SR); Comprehensive Cycle Performance
[1] L. E. Fryda; K. D. Panopoulos; and E. Kakaras; Integrated Combined Heat and Power with Biomass Gasification and SOFC-micro Gas Turbine; VGB PowerTech 4; 2008; pp.66-72.
[2] F. Calise ; M. Dentice d’ Accadia ; et al.; Single-level optimization of a hybrid SOFC–GT power plant; Journal of Power Sources 159 ;2006; pp.1169–1185
doi: 10.1016/j.jpowsour.2005.11.108.
[3] R. Toonssen; N. Woudstra; and A.H.M. Verkooijen; Reference System for a Power Plant Based on Biomass Gasification and SOFC; Delft University of Technology Energy Technology; Process & Energy department; 2008
[4] F. Calise; M. Dentice d’ Accadia; et al.; Full load synthesis/design optimization of a hybrid SOFC–GT power plant; Energy 32; 2007; pp.446–458
doi: 10.1016/j.energy.2006.06.016.
[5] M. Sucipta; S. Kimijima; and K. Suzuki; Biomass solid oxide fuel cell-micro gas turbine hybrid system: Effect of fuel composition; Journal of Fuel Cell Science and Technology 155; 2008; pp.B258-B263
[6] S. Baron; N. Brandon; et al.; The impact of wood-derived gasification gases on Ni-CGO anodes in intermediate temperature solid oxide fuel cells; Journal of Power Sources 126; 2004; pp. 58-66.
doi: 10.1016/j.jpowsour.2003.09.042.
[7] K.V. Van der Nat; N. Woudstra; Evaluation of several biomass gasification processes for the production of a hydrogen rich synthesis gas; Proceedings International Hydrogen Energy Congress and Exhibition IHEC 2005
[8] W. Doherty; A. Reynolds; D. Kennedy. Modeling and Simulation of a Biomass Gasification-Solid Oxide Fuel Cell Combined Heat and Power Plant Using Aspen Plus; Proc. 22nd International Conference on Efficiency; Cost; Optimization; Simulation and Environmental Impact of Energy Systems; 2009
[9] R. Toonssen; P. V. Aravind; et al.; System Study on Hydrothermal Gasification Combined With a Hybrid Solid Oxide Fuel Cell Gas Turbine; Fuel Cells; 10; 2010; pp. 643–653
doi: 10.1002/fuce.200900188.
[10] S. Poulou; E. Kakaras; High tempera-ture solid oxide fuel cell integrated with no-vel allothermal biomass gasification: Part II: Exergy analysis; Journal of Power Sources 159; 2006; pp. 586-594
doi: 10.1016/j.jpowsour.2005.11.040.
[11] A. Sordi; E. P. da Silva; et al.; Thermodynamic Simulation of Biomass Gas Steam Reforming for a Solid Oxide Fuel Cell (SOFC) System; Brazilian Journal of Chemical Engineering 26; 2009; pp. 745-755
doi: 10.1590/S0104-66322009000400013.
[12] N. Andriazian; off-design performance modeling of gas turbine cycles considering exergy-cost trade-off and CO2 capture; M.Sc thesis; IAU; 2008
[13] EG&G Technical Services Inc.; Fuel Cell Handbook; U.S. Dept. of Energy Office of Fossil Energy National Energy Technology Laboratory; Morgantown; West Virginia; 2004
[14] L. Fryda; K.D. Panopoulos; and E. Kakaras; Integrated CHP with autothermal biomass gasification and SOFC- MGT; Energy Conversion and Management 49; 2008; pp. 281-290
doi: 10.1016/j.enconman.2007.06.013.
[15] T.W. Song ; J.L. Sohn; et al.; Performance characteristics of a MW-class SOFC/GT hybrid system based on a commercially available gas turbine; Journal of Power Sources 158; 2006; pp.361–367
doi: 10.1016/j.jpowsour.2005.09.031.