Hanzade Haykiri-Acma
Department of Chemical Engineering, Istanbul Technical University, Istanbul, Turkey
Serdar Yaman
Department of Chemical Engineering, Istanbul Technical University, Istanbul, Turkey
Download article
http://dx.doi.org/10.3384/ecp11057251Published in: World Renewable Energy Congress - Sweden; 8-13 May; 2011; Linköping; Sweden
Linköping Electronic Conference Proceedings 57:34, p. 251-257
Published: 2011-11-03
ISBN: 978-91-7393-070-3
ISSN: 1650-3686 (print), 1650-3740 (online)
Burning tests of some agricultural waste biomass materials such as sunflower seed shell (SSS); hazelnut shell (HS); rice hull (RH); and olive refuse (OR) were performed in order to compare the combustion reactivities of these materials under dry air and oxygen. For this purpose; these samples were burned in a thermal analyzer to obtain TGA (Thermogravimetric Analysis); DTG (Derivative Thermogravimetry); DTA (Differential Thermal Analysis); and DSC (Differential Scanning Calorimetry) thermograms under both conditions. Initial sample mass was approximately 10 mg for each sample which has a particle size of <0.25 mm; and temperature was raised from ambient to 900°C with a linear heating rate of 40°C/min under gas flow rate of 100 mL/min. No hold time was allowed at the final temperature. The results of this study showed that the thermal reactivities of biomass species change in a wide region; and the type of the oxidative medium plays very important effects on the burning parameters such as the ignition point; maximum rate of combustion and its temperature; as well as the end point of burning. On the other hand; macromolecular ingredients of biomass such as hemicellulosics; celluloses; and lignin have significant effects on the combustion behavior of biomass.
[1] J. Davison; K. Thambimuthu; Technologies for capture of carbon dioxide; in: Greenhouse Gas Control Technologies; Vol.I; Elsevier; 2005; pp. 3-13.
doi: 10.1016/B978-008044704-9/50002-1.
[2] R. Allam; V. White; N. Ivens; M. Simmonds; Heaters and boilers to oxyfiring by cryogenic air separation and flue gas recycle; in : Carbon Dioxide Capture for Storage in Deep Geologic Formations; Vol. 1; Elsevier; 2005; pp.451-475.
[3] G. Pipitone; O. Bolland; Power generation with CO2 capture: Technology for CO2 purification; International Journal of Greenhouse Gas Control 3; 2009; pp. 528–534.
doi: 10.1016/j.ijggc.2009.03.001.
[4] I. Hadjipaschalis; G. Kourtis; A. Poullikkas; Assessment of oxyfuel power generation technologies; Renewable and Sustainable Energy Reviews 13; 2009; pp. 2637–2644.
doi: 10.1016/j.rser.2009.07.001.
[5] P.A. Bejarano; Y.A. Levendis; Single-coal-particle combustion in O2/N2 and O2/CO2 environments; Combustion and Flame 153; 2008; pp. 270–287.
doi: 10.1016/j.combustflame.2007.10.022.
[6] T. Wall; Y. Liu; C. Spero; L. Elliott; S. Khare; R. Rathnam; F. Zeenathal; B. Moghtaderi; B. Buhre; C. Sheng; R. Gupta; T.Yamada; K. Makino; J. Yu; An overview on oxyfuel coal combustion—State of the art research and technology development; Chemical Engineering Research and Design 87; 2009; pp. 1003–1016.
doi: 10.1016/j.cherd.2009.02.005.
[7] P.J. Van Soest; Use of detergents in the analysis of fibrous feeds. II. A rapid method for the determination of fiber and lignin. Journal of Association of Official Analytical Chemistry. 46; 1963; pp. 829-835.
[8] D.L. Klass; Biomass for renewable energy; fuels; and chemicals; Academic Press; 1998; pp. 237-239.
[9] R.Kandiyoti; A.Herod; K.Bartle; Solid fuels and heavy hydrocarbon liquids; thermal characterization and analysis; Elsevier; 2006; p.38.
[10] B.G.Miller; D.A. Tillman; Combustion engineering issues for solid fuel systems; Elsevier; 2008; pp.17-21.