J. Hepke
Institute of Fluid Power (IFD), Dresden University of Technology, Dresden, Germany
J. Weber
Institute of Fluid Power (IFD), Dresden University of Technology, Dresden, Germany
Download article
http://dx.doi.org/10.3384/ecp1392a47Published in: 13th Scandinavian International Conference on Fluid Power; June 3-5; 2013; Linköping; Sweden
Linköping Electronic Conference Proceedings 92:47, p. 475-483
Published: 2013-09-09
ISBN: 978-91-7519-572-8
ISSN: 1650-3686 (print), 1650-3740 (online)
In this article two different energy saving measures are presented. The possible savings potential and the effort of realizing these methods are described. Using these measures it was shown; that up to 55 % energy saving could be achieved for a single drive.
The paper presents the thermodynamic principles that are needed to determine the energy consumption of pneumatic drives; which consist of the compressed air and the exergy analysis calculations. Further on; the influence of the design parameters on the energy consumption has been studied. Possible savings solutions have been arranged and brought together to provide and exemplary overview. In this case two savings methods were realized on a single cylinder drive of a pneumatic handling system.
These selected energy saving solutions aim at the optimization of the design parameters of pneumatic cylinder drives and on the use of exhaust air recovery circuits. The use of these saving measures is first tested via simulation and then implemented on an example cylinder drive. For each saving measure the influence on the energy consumption and on the motion profile of the drive is investigated in detail. Focus was especially directed to the question; whether the original motion profile of the example drive remained the same after applying the saving measures
pneumatic drive systems; energy saving measures; optimization of the design parameters; exhaust air recovery circuit; pay-back period
[1] M CAI; and K Kawashima; T Kagawa. Power Assessment of Flowing Compressed Air. Published in Journal of Fluids Engineering; Transactions of the ASME; Vol.128; No.2; 2006.
[2] J Hepke; and J Weber. Energiesparende Pneumatik. fluid Markt 2013; 83-89; 2012.
[3] W T Bader; and J K Kissock. Exergy Analysis of Industrial Air Compression. Proc. from the 22th National Industrial energy Technology Conference; Houston; 2000.
[4] N N. EnEffAH - Energy Efficiency in Production in the Drive and Handling Technology Field. final report; 37- 44; 2012.
[5] C Ferraresi; and W Franco; and G Quaglia; and M Scopesi. Energy Saving in Pneumatic Drives: An Experimental Analysis. Proc. from the 9th International Workshop on Research and Education in Mechatronics; Bergamo; 2008.
[6] E Köhler; and E Zipplies. Pneumatische Antriebskonzepte unter dem Gesichtspunkt der Energieoptimierung und der Verbesserung der Dynamik. Proc. from Viertes Deutsch-Polnisches Seminar: Innovation und Fortschritt in der Fluidtechnik; Chemnitz; 2001.
[7] M Doll; and O Sawodny. Energy Efficient Adaptive Control of Pneumatic Drives with Switching Valves. Proc. from the 7th International Fluid Power Conference; Dresden; 2012.
[8] J Hepke; and J Weber. Improving Energy Efficiency of Pneumatic Handling Systems. Proc. from the 7th International Fluid Power Conference; Dresden; 2012.
[9] K-H Grote; and J Feldhusen. Dubbel – Taschenbuch für den Maschinenbau. 22th Edition; Springer-Verlag Berlin Heidelberg New York; D 29; 2007.
[10] H P Schwefel. Numerische Optimierung von Computer- Modellen mittels der Evolutionsstrategie; Birkhäuser Verlag; Basel und Stuttgart; 1977.