Arthur A. Williams
Dept. Electrical & Electronic Engineering, University of Nottingham, Nottingham, UK
Mark Gillott
Dept. Architecture & Built Environment, University of Nottingham, Nottingham, UK
Download article
http://dx.doi.org/10.3384/ecp110572126Published in: World Renewable Energy Congress - Sweden; 8-13 May; 2011; Linköping; Sweden
Linköping Electronic Conference Proceedings 57:50, p. 2126-2133
Published: 2011-11-03
ISBN: 978-91-7393-070-3
ISSN: 1650-3686 (print), 1650-3740 (online)
Before 1930; most houses in the UK were built with solid brick walls; which have high heat losses and are difficult to insulate. These homes represent nearly one-quarter of the UK housing stock. This paper covers a case-study that shows some of the difficulties to meet the UK government’s target to reduce carbon emissions by 80% by 2050. Such a target can only be met with refurbishment of all older properties and even then; energy-savings initiatives are probably not sufficient; integration of renewable energy sources is also necessary. Comparison with refurbishment initiatives in Germany demonstrates the massive investment that needs to take place; and some of the practical limitations. Strategies to limit increasing demand for energy use will be required in order to meet these ambitious targets. The case-study demonstrates the types of practical problems likely to be encountered; but also shows the importance of disseminating the experience gained by pioneers of refurbishing older homes in the UK.
[1] R. Bowie and A. Jahn; European Union – The New Directive on the energy performance of buildings – Moving closer to Kyoto; Société Royale Belge des Electriciens; April 2003. Available at: www.managenergy.net (accessed Dec; 2010).
[2] B. Boardman “Home Truths: a low-carbon strategy to reduce UK housing emissions by 80% by 2050”; University of Oxford Environmental Change Institute – research report; Nov. 2007.
[3] K. Lomas; “Energy Use in dwellings: decarbonising the stock and people” in ESRC Seminar Series How people use and ‘misuse’ buildings; 26 Jan; 2009.
[4] C. Pearson; The Complete Guide to External Wall Insulation; York Publishing Services; 2006.
[5] Energy Savings Trust; “External insulation for dwellings” Good Practice Guide 293 (2006).
[6] V. Vesma; Degree Day Data available at www.vesma.com/ddd/ (accessed Dec; 2010).
[7] Department of Environment; Food and Rural Affairs; “Waste Wood as a Biomass Fuel”; April 2008; p8.
[8] D. Jenkins; “Energy Modelling In Traditional Scottish Houses: Heriot-Watt University analysis of potential CO2 savings of building variants”; Tarbase Group report for Historic Scotland; 2008.
[9] S. Walker et al; “Scottish House Condition Survey: Key Findings for 2009” Published by the Scottish Government; 25th November 2010.
[10] C. Michelsen; S. Müller-Michelsen; “Energieeffizienz im Altbau: Werden die Sanierungspotenziale überschätzt? Ergebnisse auf Grundlage des ista-IWH-Energieeffizienzindex”; Wirtschaft im Wandel; Institut für Wirtschaftsforschung Halle; Issue 9 (2010) 22 Sept. 2010.
[11] Inbuilt Ltd & Davis Langdon; “Study on hard to fill cavity walls in domestic dwellings in Great Britain”; Report for UK Dept. for Energy & Climate Change; October; 2010.
[12] www.sustainable-energyacademy.org.uk (Accessed December 2010)
[13] M. Gillott and C. Spataru; “Materials for energy efficiency and thermal comfort in the refurbishment of existing buildings”; in “Materials for energy efficiency and thermal comfort in buildings”; Edited by M Hall; Woodhead Publishing; April 2010.
doi: 10.1533/9781845699277.3.649.