Conference article

Energy Efficiency Opportunities within the Powder Coating Industry

Sofie Osbeck
Swerea IVF AB, Mölndal, Sweden

Charlotte Bergek
Swerea IVF AB, Mölndal, Sweden

Anders Klässbo
Swerea IVF AB, Mölndal, Sweden

Patrik Thollander
Department of Management and Engineering, Linköping Univeristy, Linköping, Sweden

Simon Harvey
Department of Energy and Environment, Chalmers University of Technology, Göteborg, Sweden

Patrik Rohdin
Department of Management and Engineering, Linköping Univeristy, Linköping, Sweden

Download articlehttp://dx.doi.org/10.3384/ecp110571700

Published in: World Renewable Energy Congress - Sweden; 8-13 May; 2011; Linköping; Sweden

Linköping Electronic Conference Proceedings 57:29, p. 1700-1707

Show more +

Published: 2011-11-03

ISBN: 978-91-7393-070-3

ISSN: 1650-3686 (print), 1650-3740 (online)

Abstract

A new challenge to reduce energy usage has emerged in Swedish industry because of increasing energy costs. Energy usage in the Swedish powder coating industry is about 525 GWh annually. This industry has a long and successful record of working towards reduced environmental impact. However; they have not given priority to energy saving investments. Electricity and LPG; for which end-user prices are predicted to increase by as much as 50 – 60% by 2020; are the main energy carriers used in the plants. This paper presents the results of two detailed industrial energy audits conducted with the aim of quantifying the energy efficiency potential for the Swedish powder coating industry. Energy auditing and pinch analysis methods were used to identify possible energy housekeeping measures and heat exchanging opportunities. The biggest users of energy within the plants are the cure oven; drying oven and pre-treatment units. The energy use reduction by the housekeeping measures is 8 – 19% and by thermal heat recovery an additional 8 – 13%. These measures result in an average energy cost saving of 25% and reduction of carbon dioxide emissions of 30%. The results indicate that the powder coating industry has a total energy efficiency potential of at least 20%.

Keywords

Powder coating; energy audit; pinch analysis; energy efficiency

References

[1] B. Karlsson; Strategi för systemförändringar av industriell energianvändning; Linköpings universitet; 2001-05-02; pp 1-3.

[2] T. Kåberger; D. Andersson; Energiförsörjningen I Sverige – en korttidsprognos; Energimyndigheten; ISSN 1403-1892; 2009; pp 17-20.

[3] T. Kåberger; S. Lublin; A. Andersson; Energiläget 2009; Energimyndigheten; pp 8-12; 31

[4] Simon Harvey; Department of Energy and Environment; Chalmers University of Technology; 2010.

[5] Lars Österberg; Svensk Pulverlackteknisk Förening; 2010.

[6] Trygg; L.; Karlsson B.; 2005. Industrial DSM in a deregulated European electricity market - a case study of 11 plants in Sweden. Energy Policy 33 (11): 1445-1459. doi: 10.1016/j.enpol.2004.01.002.

[7] Thollander; P.; Rohdin; P.; Danestig; M.; 2007. Energy policies for increased industrial energy efficiency: Evaluation of a local energy programme for manufacturing SMEs. Energy Policy;35(11):5774-83. doi: 10.1016/j.enpol.2007.06.013.

[8] Liberto; N.; 2003. Users’s guide to Powder Coating 4th edition.

Citations in Crossref