Olof Noréus
ITH, Institute of Applied Hydraulics, Örnsköldsvik, Sweden
Magnus Hägglund
ITH, Institute of Applied Hydraulics, Örnsköldsvik, Sweden
Mats Emlén
ITH, Institute of Applied Hydraulics, Örnsköldsvik, Sweden
Ladda ner artikel
http://dx.doi.org/10.3384/ecp1392a31Ingår i: 13th Scandinavian International Conference on Fluid Power; June 3-5; 2013; Linköping; Sweden
Linköping Electronic Conference Proceedings 92:31, s. 319-325
Publicerad: 2013-09-09
ISBN: 978-91-7519-572-8
ISSN: 1650-3686 (tryckt), 1650-3740 (online)
As the boom on for example a conventional reach stacker; a forwarder or a wheel loader is retracted and lowered; the entire potential energy of the boom and the load is wasted and converted into fluid heat in the control valves. To reduce the energy consumption and power installation requirements; one possible solution is to compensate for the empty weight; for example by utilising a spring or gas accumulator. By integrating a gas accumulator into the piston rod of the boom cylinder; it is possible to improve the energy efficiency on existing equipment just by changing the boom cylinder.
A number of load handling sequences have been simulated in SimulationX software using a conventional hydraulic reach stacker load handling simulation model and simulation results have been compared to measurements. The simulation results show a good overall compliance with reality. The simulation model can provide detailed information about how large the losses are in different components of the system. By modifying the model and utilise the measured data to get a relevant loading cycle; it is possible to evaluate strategies for improved energy efficiency. Performed simulations indicate that it is possible to further improve the energy efficiency of the system by adding a cylinder and accumulator to recuperate energy when lowering the boom
[1] Xingui Liang and Tapio Virvalo. Energy reutilization and balance analysis. Proceedings of the Fifth International Conference on Fluid Power Transmission and Control (ICFP); 4:306–310; 2001.
[2] Karl-Erik Rydberg. Energy efficient hydraulic systems and regenerative capabilities. Proceedings of the Ninth Scandinavian International Conference on Fluid Power; SICFP’05; 2005.
[3] Hans Dresig and Franz Holzweißig. Dynamics of Machinery: Theory and Applications. Springer-Verlag; Berlin Heidelberg; 2010. ISBN 978-3-540-89939-6.
[4] Saeed B. Niku. Introduction to Robotics: Analysis; Control; Applications. John Wiley & Sons; 2010. ISBN 978- 0-470-60446-5.
[5] Ryszard Jablonski; Mateusz Turkowski; and Roman Szewczyk. Recent Advances in Mechatronics. Springer- Verlag; Berlin Heidelberg; 2007. ISBN 978-3-540- 73955-5.