Publicerad: 2015-11-25
ISBN: 978-91-7685-900-1
ISSN: 1650-3686 (tryckt), 1650-3740 (online)
Biogas is one interesting fuel for the decentralized energy production as it can be originated from many different sources. The purification of biogas to the point where it can also be used as a substitute for natural gas requires several purification steps. This paper focuses on the separation of carbon dioxide. A common solver using the discretized Gauss-Seidel method was applied for three different biogas purification process models describing MEA absorption, pressurized water scrubbing and multistage membrane separation. Simulations based on experimental designs were conducted in order to evaluate the applicability of those purification processes for different sources of biogas. The models used were rather simplified descriptions of the processes aimed to describe the directions of the changes in a general manner and indicate the controllability of the processes.
CO2 separation; Steady-state mass balance; Discretized Gauss-Seidel method; Full factorial design
Diamond, W. Practical experimental designs for engineers and scientists, Van Nostrand Reinhold, New York, 1981, 0-534-97992-0.
Ferreira A., Ribeiro A., Kulaç S., Rodrigues A. (2014) Methane purification by adsorptive processes in MIL-53(Al), Chemical Engineering Science, 124, 79-95. doi: 10.1016/j.ces.2014.06.014.
Gabrielsen J., Michelsen M., Stenby E., Kontogeorgis G. (2006) Modeling of CO2 absorber using an AMP solution, AIChE Journal, 52(10), 3443-3451. doi: 10.1002/aic.10963.
Greer T. 2008, Modeling and simulation of post combustion CO2 capturing, M.Sc thesis, Telemark University College, Porsgrunn, Norway.
Hall S. (2012) Branan’s rules of thumb for chemical engineers, 5th ed., Butterworth-Heinemann 2012, 978-0-12-387785-7.
Harlacher T., Scholz M., Melin T., Wessling M. (2012) Optimizing argon recovery: membrane separation of carbon monoxide at high concentrations via the water gas shift, Industrial & Engineering Chemistry Research, 51(38), 12463-12470. doi: 10.1021/ie301485q.
Kasikamphaiboon P., Chungsiriporn J., Bunyakan C., Wiyaratn W. (2013) Simulataneous removal of CO2 and H2S using MEA solution in a packed bed column absorber for biogas upgrading, Songklanakarin Journal of Science and Technology, 35(6), 683-591.
Khan F.M., Krishnamoorthi V., Mahmud T. (2011) Modelling reactive absorption of CO2 in packed columns for postcombustion carbon capture applications, Chemical Engineering Research and Design, 89(9), 1600-1608. doi: 10.1016/j.cherd.2010.09.020.
Kucka L., Müller I., Kenig E.Y., Górak A. (2003) On the modelling and simulation of sour gas absorption by aqueous amine solutions, Chemical Engineering Science, 58(16), 3571-3578. doi: 10.1016/S0009-2509(03)00255-0.
Makaruk A., Harasek M., (2009) Numerical algorithm for modelling multicomponent multipermeator systems, Journal of Membrane Science, 344, 258-265.
doi: 10.1016/j.memsci.2009.08.013.
Makaruk A., Miltner M., Harasek M. (2010) Membrane biogas upgrading processes for the production of natural gas substitute, Separation and Purification Technology, 74(1), 83-92. doi: 10.1016/j.seppur.2010.05.010.
Mohebbi V., Naderifar A., Behbahani R.M., Moshfeghian M. (2012) Determination of Henry’s law constant of light hydrocarbon gases at low temperatures, The Journal of Chemical Thermodynamics, 51, 8-11. doi: 10.1016/j.jct.2012.02.014.
Nock W., Walker M., Kapoor R., Heaven S. (2014) Modeling the Water Scrubbing Process and Energy Requirements for CO2 Capture to Upgrade Biogas to Biomethane, Industrial& Engineering Chemictry Research, 53(32), 12783-12792. doi: 10.1021/ie501280p.
Scholz M. (2013) Membrane based biogas upgrading processes, Ph.D. dissertation, RWTH Aachen University, 2013.
Wellinger A., Murphy J., Baxter D. (eds.) The Biogas Handbook: Science, Production and Applications, Woodhead Publishing Limited 2013, 978-0-85709-498-8.
