Simulation of Transcritical Flow in Hydraulic Structures

Cornelius Agu
Faculty of Technology, Telemark University College, Norway

Bernt Lie
Statoil AS, Norway

Geir Elseth
Faculty of Technology, Telemark University College, Norway

Ladda ner artikelhttp://dx.doi.org/10.3384/ecp15119369

Ingår i: Proceedings of the 56th Conference on Simulation and Modelling (SIMS 56), October, 7-9, 2015, Linköping University, Sweden

Linköping Electronic Conference Proceedings 119:37, s. 369-375

Visa mer +

Publicerad: 2015-11-25

ISBN: 978-91-7685-900-1

ISSN: 1650-3686 (tryckt), 1650-3740 (online)


In hydraulic engineering, transcritical flows are often required in some applications. One example is in a Venturi channel where the occurrence of critical depth is used to estimate flow rate in the channel. In this paper, a simple numerical scheme that predicts transcritical flows in hydraulic structures is developed based on the Saint Venant Equations (SVE). The solution of this scheme is aimed to be used in real time to calibrate the model that uses a measured liquid level to estimate flow rate of the fluid in a Venturi channel. The proposed algorithm consists of a set of ordinary differential equations derived from discretizing SVE in space along the channel axis. The results based on this scheme show that the algorithm is capable of predicting flows involving transcritical conditions. Errors associated with the scheme are relatively small in locating shocks in flows with imposed downstream boundary level, and in predicting the transition within the throat of Venturi channels.


Transcritical; Saint Venant Equations; Critical Depth; Hydraulic Structures; Boundary Condition


C. Berg, A. Malagalage, C.E. Agu, G.-O. Kaasa, K. Vaagsaether and B. Lie (2015): Model-Based Drilling Fluid Flow Rate Estimation Using Venturi Flume. Proceedings, 2nd IFAC Workshop on Automatic Control in Offshore Oil and Gas Production, Florianopolis, Brazil, May 27-29, 2015.

C.E. Agu (2014): Model-Based Estimation of drilling mud Flow using a Venturi Channel. Master Thesis Report. Telemark University College, Porsgrunn, Norway, 2014.

C.E. Agu and B. Lie. Numerical Solution of the Saint Venant Equation for Non-Newtonian Fluid. Conference on Simulation and Modelling (SIMS 55), October 21-22, 2014. Aalborg, Denmark.

C. Sart, J.-P. Baume, P.-O. Malaterre and V. Guinot (2010): Adaptation of Preissmann’s Scheme for Transcritical Open Channel Flows. Journal of Hydraulic Research, 48(4): 428–440, 2010.

E.A. Meselhe, F. Sotiropoulos and F.M. Holly-Jr. (1997): Numerical Simulation of Transcritical Flow in Open Channel. Journal of Hydraulic Engineering, 123(9): 774–
0783, 1997.

H.K. Versteeg and W. Malalasekera (2007): An Introduction to Computational Fluid Dynamics: Finite Volume Method, 2nd ed. England: Pearson Education Limited, Edinburgh Gate Harlow Essex CM20 2JE, 2007.

M.-H. Tseng, C-A. Hsu and C.R. Chu (2001): Channel Routing in Open Channel Flows with Surges. Journal of Hydraulic Engineering, 127(2): 0115-0122, 2001.

R. Sisson, P. Lacoste-Bouchet, M. Vera, M. Costello, E. Hedblom, B. Sheets and L. Sittoni (2012): An Analytical Model for Tailings Deposition from Pilot-Scale Testing. In Proc. 3rd Int. Oil Sand Tailings Conference, Edmonton, Canada. 2012.

R. Szymkiewicz (2010): Numerical Modeling in Open Channel Hydraulics (Vol.83), Springer, ISBN 978-90-481-3673-5, 2010.

T.Y. Zerihun and J.D. Fenton (2006): One-Dimensional Simulation Model for Steady Transcritical Free Surface Flows at Short Length Transitions. Journal of Advances in Water Resources, 29: 1598–1607, 2006. doi: 10.1016/j.advwatres.2005.11.011.

Citeringar i Crossref