Dynamic Simulations of the Post-combustion CO2 Capture System of a Combined Cycle Power Plant

Rubén M. Montañés
Department of Energy and Process Engineering, NTNU – Norwegian University of Science and Technology, Trondheim, Norway

Lars Olof Nord
Department of Energy and Process Engineering, NTNU – Norwegian University of Science and Technology, Trondheim, Norway

Ladda ner artikelhttp://dx.doi.org/10.3384/ecp17132111

Ingår i: Proceedings of the 12th International Modelica Conference, Prague, Czech Republic, May 15-17, 2017

Linköping Electronic Conference Proceedings 132:11, s. 111-119

Visa mer +

Publicerad: 2017-07-04

ISBN: 978-91-7685-575-1

ISSN: 1650-3686 (tryckt), 1650-3740 (online)


Dynamic process models of the capture unit of a 600 MW combined cycle power plant with post-combustion CO2 capture were developed in the Modelica language. The process models were utilized to understand the transient response of the capture unit when the plant was initially operated at steady-state conditions at different power plant’s loads. Simulations to characterize the open-loop response of main process variables of the process to step-change disturbances in flue gas mass flow rate, solvent circulation mass flow rate and reboiler duty were performed. It was found that the plant was slower when operated at lower loads, i.e., it required longer total stabilization times for the most relevant variables of the process. Simulations revealed that the PCC unit responded significantly faster to an increase in exhaust gas mass flow rate than to a reduction in exhaust gas mas flow rate.


Transient, carbon capture, gas liquid contactors, operational flexibility, chemical absorption


Aske, E. M. B. & Skogestad, S., 2009. Consistent inventory control. Industrial engineering chemistry research, Volume 48, pp. 10892-10902. doi: http://pubs.acs.org/doi/abs/10.1021/ie801603j

Bui, M., Gunawan, I., Verheyen, V., Feron, P.,Meuleman, E., Adeloju, S., 2014. Dynamic modeling and optimisation of flexible operation in post-combustion CO2 capture plants – A review. Computers and Chemical Engineering, Volume 61, pp. 245 - 265. doi: http://dx.doi.org/10.1016/j.compchemeng.2013.11.015

Dutta, R., Nord, L. O. & Bolland, O., 2017. Selection and design of post-combustion CO2 capture process for 600 MW natural gas fueled thermal power plant based on operability. Energy, Volume 121, pp. 643-656. doi: http://dx.doi.org/10.1016/j.energy.2017.01.053

Flø, N. E., 2015. Doctoral Thesis: Post-combustion absorption-based CO2 capture: modeling, validation and analysis of process dynamics. Trondheim (Norway): Doctoral Theses at NTNU, 2015:244. doi: http://hdl.handle.net/11250/301562

IEA, 2011. Harnessing Renewable Energies: A guide to the balancing challenge, 9, rue de la Fédération, 75739 Paris Cedex 15, France: International Energy Agency. IEA, 2016. 20 years of carbon capture and storage - Accelerating future deployment, Paris, France: IEA. IEA-GHG, 2012. Operating Flexibility of Power Plants with CCS.

Kvamsdal, H. M., Jakobsen, J. P. & Hoff, K., 2009. Dynamic modeling and simulation of a CO2 absorber column for postcombustion CO2 capture. Chemical Engineering Process, Volume 48, pp. 135-144. doi: http://dx.doi.org/10.1016/j.cep.2008.03.002

Modelon AB, Post-combustion capture with amine solutions. Montañés, R. M., Flø N. E., Dutta, R., Nord, L. O., Bolland, O., 2017. Dynamic process model development and validation with transient plant data collected from an MEA test campaign at the CO2 Technology Center Mongstad. Energy Procedia. (accepted for publication). doi: 10.1016/j.egypro.2017.03.1284

Montañés, R. M., Korpås, M., Nord, L. O. & Jaehnert, S., 2016. Identifying operational requirements for flexible CCS power plant in future energy systems. Energy Procedia, 86(TCCS-8), pp. 22-31. doi: https://doi.org/10.1016/j.egypro.2016.01.003

Panahi, M., 2011. Ph.D. Thesis: Plantwide control for economically optimal operation of chemical plants - Applications to GTL plants and CO2 capturing processes. Trondheim: Norwegian University of Science and Technology. doi: http://hdl.handle.net/11250/248272

Prölß, K., Tummerscheit, H., Velut, S. & Åkesson, J., 2011. Dynamic model of a post-combustion absorption unit for use in a non-linear model predictive control scheme.. Energy Procedia, 4(GHGT-11), pp. 2620-2627. doi: https://doi.org/10.1016/j.egypro.2011.02.161

Citeringar i Crossref