Konferensartikel

Simulation of Flame Acceleration and DDT

Knut Vaagsaether
Department of Process, Energy and Environmental Technology, University College of Southeast Norway, Porsgrunn, Norway

Ladda ner artikelhttp://dx.doi.org/10.3384/ecp17142646

Ingår i: Proceedings of The 9th EUROSIM Congress on Modelling and Simulation, EUROSIM 2016, The 57th SIMS Conference on Simulation and Modelling SIMS 2016

Linköping Electronic Conference Proceedings 142:94, s. 646-652

Visa mer +

Publicerad: 2018-12-19

ISBN: 978-91-7685-399-3

ISSN: 1650-3686 (tryckt), 1650-3740 (online)

Abstract

This paper presents a combustion model and a simulation method for modeling flame acceleration (FA) and deflagration to detonation transition (DDT) in a premixed gas. The method is intended to produce the most important effects in FA and DDT without resolving the flame front on the computational mesh. The simulations presented here are of stoichiometric hydrogen-air mixtures in a channel with repeated obstacles. The channel is 2 m long and 110 mm wide, with a height of either 20 mm or 40 mm. The obstacles gives a blockage ratio of 0.5. These values are the same as for experiments by other researchers and is used for comparison. The combustion model combines a turbulent burning velocity model and a two-step Arrhenius kinetic rate. The simulations show similar flame speeds and pressures as seen in experiments, and the process of DDT is shown to be caused by shock focusing and shock flame interactions. The simulations show that the quasi detonation regime is a series of transition to detonation events followed by failure of the detonation. Results from both 2D and 3D simulations are presented, since the 2D simulations show how the method can reproduce important effects.

Nyckelord

CFD, flame acceleration, DDT, detonation, hydrogen

Referenser

Inga referenser tillgängliga

Citeringar i Crossref