Konferensartikel

Min Pan
Centre for Power Transmission and Motion Control, Department of Mechanical Engineering, University of Bath, Bath, UK

Ladda ner artikelhttp://dx.doi.org/10.3384/ecp17144302

Ingår i: Proceedings of 15:th Scandinavian International Conference on Fluid Power, June 7-9, 2017, Linköping, Sweden

Linköping Electronic Conference Proceedings 144:30, s. 302-308

Publicerad: 2017-12-20

ISBN: 978-91-7685-369-6

ISSN: 1650-3686 (tryckt), 1650-3740 (online)

The switched inertance hydraulic system (SIHS) is a novel high-bandwidth and energy-efficient device which can adjust or control flow and pressure by a means that does not rely on throttling the flow and dissipation of power. The three-port SIHS usually consists of a high-speed switching valve, an inertance tube and an accumulator. The device can provide an efficient step-up or stepdown of pressure or flow rate by using a digital control technique. The existing analytical models of an SIHS can effectively predict the flow response, pressure loss, system characteristics and efficiency. The optimal switching frequency and ratio of an SIHS can also be accurately estimated by using the analytical models. However, there is no study related to the ‘optimal inertance tube’, which considers the optimal tube diameter and length corresponding to different system operating frequencies and ratios. In other words, there is inertia and resistance balance of the system. This paper investigates the global optimisation of an SIHS based on genetic algorithm. The energy cost function is proposed, and the optimal solutions are presented. Numerical simulation models are used to validate the results. It provides a general guidance of the SIHS design and its parameter optimisation.

[1] Brown, F.T., Switched reactance hydraulics: a new way to control fluid power, Proceedings of the National Conference on Fluid Power, Chicago, pp.25-34, 1987.

[2] Brown,F.T., A hydraulic rotary switched inertance servo-transformer, Transactions ASME Journal of Dynamic Systems, Measurement, and Control, vol. 110, pp.144-150, 1988.

[3] Johnston, D.N., A switched inertance device for efficient control of pressure and flow, Proceedings of the Bath/ASME Fluid Power and Motion Control Symposium, Hollywood, USA, pp.1-8. 2009.

[4] Pan, M., Johnston, D.N., Plummer, A., Kudzma, S. and Hillis, A., Theoretical and experimental studies of a switched inertance hydraulic system. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, Vol. 228 (1), pp. 12-25, 2014.

[5] Pan, M., Johnston, D.N., Plummer, A., Kudzma, S. and Hillis, A., Theoretical and experimental studies of a switched inertance hydraulic system including switching transition dynamics, non-linearity and leakage. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, vol. 228 (10), pp. 802-815, 2014.

[6] Pan, M., Johnston, D.N., Robertson, J., Plummer, A., Hillis, A. and Yang, H., Experimental investigation of a switched inertance hydraulic system with a high-speed rotary valve. Transactions ASME Journal of Dynamic Systems, Measurement and Control, 137 (12), 121003. 2015.

[7] Johnston, D.N., Pan, M., Plummer, A., Hillis, A. and Yang, H., Theoretical studies of a switched inertance hydraulic system in a four-port valve configuration. In: The Seventh Workshop on Digital Fluid Power, Linz, Austria, 2015.

[8] Pan, M. Plummer, A. El Agha, A. Theoretical and Experimental Studies of a Switched Inertance Hydraulic System in a Four-Port High-Speed Switching Valve Configuration . Preprints 2017, 2017040177 (DOI: https://doi.org/10.20944/preprints201704.0177.v1). Submitted to Energies.

[9] Scheidl, R., B. Manhartsgruber, H. Kogler, B. Winkler, and M. Mairhofer. The hydraulic buck converter–concept and experimental results. In Proceedings of the Sixth International Conference on Fluid Power, Dresden, Germany, 2008.

[10] Kogler, H. and Scheidl, R., Two basic concepts of hydraulic switching converters. In The First Workshop on Digital Fluid Power, Tampere, Finland. Oct, 2008.

[11] Kogler, H., Scheidl, R., Ehrentraut, M., Guglielmino, E., Semini, C., and Caldwell, D. G., A compact hydraulic switching converter for robotic applications, Fluid Power and Motion Control, Bath, pp. 55–66, 2010.

[12] Scheidl, R., Garstenauer, M., and Manhartsgruber, B., Switching type control of hydraulic drives—A promising perspective for advanced actuation in agricultural machinery, SAE Technical Paper No. 2000-01-2559. 2009.

[13] Van de Ven, J. D., On fluid compressibility in switchmode hydraulic circuits—Part I: modeling and analysis, ASME J. Dyn. Syst. Meas. Control, 135(2), p. 021013, 2013.

[14] Rannow, M.B. and Li, P.Y., Soft switching approach to reducing transition losses in an on/off hydraulic valve. Journal of dynamic systems, measurement, and control, 134(6), p.064501. 2012.

[15] Yudell, A.C. and Van de Ven, J.D., Soft Switching in Switched Inertance Hydraulic Circuits. In BATH/ASME Symposium on Fluid Power and Motion Control (pp. V001T01A040-V001T01A040). American Society of Mechanical Engineers. 2016.

[16] Kogler, H., Scheidl, R. and Schmidt, B.H., Analysis of wave propagation effects in transmission lines due to digital valve switching. In ASME/BATH 2015 Symposium on Fluid Power and Motion Control (pp. V001T01A057-V001T01A057). American Society of Mechanical Engineers. October 2015.

[17] Stecki, JS, Davis, D., Fluid transmission lines – distributed parameter models part 1: a review of the state of the art. Proceedings of the Institution of Mechanical Engineers, Part A: J Power and Energy; 200: 215–228, 1986.

[18] Goldberg, D.E., Holland, J.H., Genetic algorithms and machine learning. Machine learning, 3(2), pp.95-99. 1988.

[19] Krus, P., Weddfelt, K., Palmberg, JO., Fast pipeline models for simulation of hydraulic system. Transactions ASME Journal of Dynamic Systems, Measurement and Control, 116: 132–136. 1994.

[20] Johnston DN. The transmission line method for modelling laminar flow of liquid in pipelines. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering; 226:586–597. 2012.

[21] Pan, M., Adaptive control of a piezoelectric valve for fluid-borne noise reduction in a hydraulic buck converter. Transactions ASME Journal of Dynamic Systems, Measurement and Control. DOI: https://doi.org/10.1115/1.4035613. 2017.