Konferensartikel

Riding Comfort Simulation with air ride seat for heavy duty vehicle

Hyung Yun Choi
HongIk University, Korea

Whe-Ro Lee
HongIk University, Korea

Jong-Chan Park
Hyundai Motor Company, Korea

Kee-Young Yang
Hyundai Motor Company, Korea

Ladda ner artikelhttp://dx.doi.org/10.3384/ecp1814812

Ingår i: Proceedings of the 2nd Japanese Modelica Conference, Tokyo, Japan, May 17-18, 2018

Linköping Electronic Conference Proceedings 148:1, s. 12-18

Visa mer +

Publicerad: 2019-02-21

ISBN: 978-91-7685-266-8

ISSN: 1650-3686 (tryckt), 1650-3740 (online)

Abstract

The design of driver’s seat suspension of the commercial truck differs from the one of the passenger car. The vibration and the structural characteristics of the suspension are consequently quite different. Unlike passenger cars, the vibration frequency of commercial truck suspensions is considerably low at 1 to 3 Hz. (Mayton, 2006). The truck seat has an air ride seat. The structural design of air ride seat at heavy-duty vehicle includes serial and parallel combinations of the shock absorber, air spring, and PU foam pad to achieve a good vibration damping. The 1D lumped network solution is an effective design tool with the multi-physical subcomponents. And this also enables a direct coupling into the system modeling of the vehicle body for an optimal calibration of engineering parameters taking the relevant dynamic performance of neighboring parts into account. The mechanical characteristics of each component and their assembly were identified for the 1D modeling. The result of validation and verification of the proposing 1D model of the air ride seat is also introduced.

Nyckelord

Air spring, Seat comfort, ISO 2631

Referenser

Mayton AG, DuCarme JP, Jobes CC, Matty TJ. ASME. Laboratory Investigation of Seat Suspension Performance During Vibration Testing., 2006. doi:10.1115/IMECE2006- 14146

Yoo W.S., Park S.J., Park D.W., Kim Min-Seok, Lim O.K., Jeong W.B... International Journal of Automotive Technology. Comparison of ride comforts via experiment and computer simulation. 7. 309-314., 2006

Christian Amann, Andre Huschenbeth, Raphael Zenk, Nicole Montmayeur, Christian Marca, Carole Michel. Digital Human Modeling Symposium. Virtual Assessment of Occupied Seat Vibration Transmissibility, 2008. doi: 10.4271/2008-01-1861

Hao Liu, Jaecheon Lee, KSAE. An Experimental Investigation on the Characteristics of automotive air spring, pp. 4-8, 2008

H.Y. Choi, K. Kim, C. Kim, S. Sah, S. Kim, S. Hwang, K. Lee, J. Pyun, N. Montmayeur, I. Lee. Digital Human Modeling Symposium. Challenge of Lumbar Support Design Using Human Body Models, 2008. doi: 10.4271/2008-01-1860

International Standard Organization ISO 2631/1. Evaluation of Human Exposure to Whole-body Vibration, Part1: General Requirements, 1985

N. Montmayeur, C. Marca, E. Haug, H.Y. Choi, S. Sah. Digital Human Modeling Symposium. Numerical and Experimental Analyses of Seating and Riding Comfort, 2004

S. Kim, S. Hwang, K. Lee, J. Pyun, H.Y. Choi, K. Kim, S. Sah, N. Montmayeur. Digital Human Modeling Symposium. New Anthropometry of Human Body Models for Riding Comfort Simulation, 2007. doi:10.4271/2007-01-2457

VSS manual, ESI GROUP SOLVER REFERENCE MANUAL. GETTING STARTED WITH PAM-COMFORT, page 18, 2010

Whe-Ro Lee, Manyong Han, Hyung Yun Choi, Jungtae Yang, Inhyeok Lee, Kee Young Yang, Jong-Chan Park. PAM User Conference Asia. Air Ride Seat for Heavy Duty Vehicle. 2017

Citeringar i Crossref