Konferensartikel

Simulation of the dynamic behaviour of steam turbines with Modelica

Juergen Bimbaum
Siemens AG, Energy Sector, Erlangen, Germany

Markus Joecker
Siemens AG, Energy Sector, Finspång, Sweden

Kilian Link
Siemens AG, Energy Sector, Erlangen, Germany

Robert Pitz-Paal
German Aerospace Center, Institute of Technical Thermodynamics, Cologne, Germany

Franziska Toni
Siemens AG, Energy Sector, Erlangen, Germany

Gerta Zimmer
Siemens AG, Energy Sector, Muelheim, Germany

Ladda ner artikelhttp://dx.doi.org/10.3384/ecp09430055

Ingår i: Proceedings of the 7th International Modelica Conference; Como; Italy; 20-22 September 2009

Linköping Electronic Conference Proceedings 43:82, s. 702-707

Visa mer +

Publicerad: 2009-12-29

ISBN: 978-91-7393-513-5

ISSN: 1650-3686 (tryckt), 1650-3740 (online)

Abstract

Steam turbine technology is one of the leading technologies used in electricity production since more than one hundred years. In recent time requirements for steam turbines have been changing slowly. Steam turbines are not longer used in power plants with high operation times and a high full load share only; but are also implemented in combined cycle power plants or solar thermal power plants. This type of plants requires good dynamic behavior of the steam turbine due to fast and frequent start ups and daily cycling.

To optimize the performance of this kind of power plants and their components it is necessary to simulate and analyze their dynamic behavior. Therefore; a general model approach for steam turbines within Modelica has been developed. This model approach is based on a general model; which can be adjusted to the necessary model depth as described in this paper.

Steam turbines in a solar thermal power plant with direct steam generation must fulfill special requirements regarding their dynamic behavior. Hence; this model is applied as an example to explain the behavior of an industrial steam turbine used in such plants. Furthermore; this paper shows first results of simulations with turbine models. To validate the model; the results are compared with results from the Siemens internal steady state calculation tool. Since results stay within the estimated accuracy; the model approach can be used for further calculations.

The dynamic behavior of the turbine is analyzed by using typical solar irradiance disturbances. This analysis shows that no critical operation points occur within the turbine.

Nyckelord

Solar thermal power plant; dynamic turbine behavior; turbine modeling

Referenser

[1] Birnbaum J.; Eck M.; et al. A Direct Steam Generation Solar Power Plant with Integrated Thermal Storage. Las Vegas; USA: 14th Bienial SolarPACES Symposium; 2008.

[2] Birnbaum J.; Hirsch T.; et al. A Concept for Future Parabolic Trough Based Solar Thermal Power Plants. Berlin; Germany: 15th International Conference on the Properties of Water and Steam; 2008.

[3] Birnbaum J.; Feldhoff J.; et al. Steam Temperature Stability in a Direct Steam Generation Solar Power Plant. Berlin; Germany: 15th Bienial SolarPACES Symposium; 2009.

[4] Traupel W. Thermische Turbomaschinen II.; 3. edition. Berlin; Heidelberg; New York: Springer Verlag; 1982. doi: 10.1007/978-3-642-96632-3.

[5] International Electronic Commission (IEC) Steam turbines – Part 1: Specifications; IEC 60045-1. Geneva; 1991

Citeringar i Crossref