S. N. Hossain
Sustainable Energy Centre, School of Advanced Manufacturing and Mechanical Engineering, University of South Australia, Australia
S. Bari
Sustainable Energy Centre, School of Advanced Manufacturing and Mechanical Engineering, University of South Australia, Australia
Ladda ner artikel
http://dx.doi.org/10.3384/ecp11057764Ingår i: World Renewable Energy Congress - Sweden; 8-13 May; 2011; Linköping; Sweden
Linköping Electronic Conference Proceedings 57:3, s. 764-771
Publicerad: 2011-11-03
ISBN: 978-91-7393-070-3
ISSN: 1650-3686 (tryckt), 1650-3740 (online)
In this research; experiments were conducted to measure the exhaust waste heat available from a 60 kW automobile engine. The performance of an available shell and tube heat exchanger using water as the working fluid was conducted. With the available data; computer simulation was carried out to improve the design of the heat exchanger. Two heat exchangers were used: one to generate saturated and the other to generate super heated vapours. These two heat exchangers can be arranged in parallel or series. In series arrangement; the exhaust gas was first passed through superheated heat exchanger and then through the saturated heat exchanger. Whereas; in parallel arrangement; the exhaust gas was divided to pass through saturated and superheated heat exchangers. In both cases; working fluid was passed first through saturated heat exchanger and then through superheated heat exchanger. Computer simulation was carried out to investigate the effectiveness of the proposed heat exchanger for different working fluid like water; ammonia; and HFC-134a. It is found that with the exhaust heat available from the diesel engine additional 15%; 13% and 8% power can be achieved by using water; HFC-134a and ammonia as working fluid respectively.
[1] M. Hatazawa; H.; Sugita; T.;Ogawa; Y.;Seo; "Performance of a thermoacoustic sound wave generator driven with waste heat of automobile gasoline engine;" Transactions of the Japan Society of Mechanical Engineers (Part B; vol. 70; pp. 292–299; 2004.
[2] V. Johnson; "Heat-generated cooling opportunities in vehicles;" SAE Technical Papers 2002.
doi: 10.4271/2002-01-1969.
[3] T. C. Hung; et al.; "A review of organic rankine cycles (ORCs) for the recovery of low-grade waste heat;" Energy; vol. 22; pp. 661-667; 1997.
doi: 10.1016/S0360-5442(96)00165-X.
[4] J. E. Boretz; in 5th Proceedings of the International Offshore Mechanics and Arctic Engineering Symposium (4th ed.); 1986; p. 279.
[5] P. De Marchi Desenzani and M. Gaia; Performance analysis of innovative collector fields for solar-electric plants; using air as heat transfer medium; 1984.
[6] F. DiBella; et al.; "Laboratory and on-highway testing of diesel organic Rankine compound long-haul vehicle engine;" SAE Technical Papers 1983.
[7] E. Doyle; DiNanno; L; Kramer; S; "Installation of a Diesel-Organic Rankine Compound Engine in a Class 8 Truck for a Single-Vehicle Test;" SAE Technical Papers 1979.
[8] P. Patel; Doyle; EF; "Compounding the Truck Diesel Engine With An Organic Rankine-Cycle System;" SAE Technical Papers 1976.
doi: 10.4271/760343.
[9] S. E. Aly; "Diesel engine waste-heat power cycle;" Applied Energy; vol. 29; pp. 179-189; 1988.
doi: 10.1016/0306-2619(88)90027-X.
[10] W. Koebbeman; "Geothermal wellhead application of a 1-MW industrial ORC power system;" 1985; pp. 2712-2717.
[11] S. Hounsham; Stobart; R; Cooke; A; Childs; P; "2008-01-0309 Energy Recovery Systems for Engines;" SAE SP; vol. 2153; p. 79; 2008.
[12] M. Kadota and K. Yamamoto; "Advanced transient simulation on hybrid vehicle using Rankine cycle system;" SAE International Journal of Engines; vol. 1; p. 240; 2009.
[13] C. Nelson; "Exhaust Energy Recovery;" presented at the Diesel Engine-Efficiency and Emissions Research (DEER) Conference; Dearborn; Michigan; 2008.
[14] R. W. Kruiswyk; "An Engine System Approach to Exhaust Waste Heat Recovery;" presented at the Diesel Engine-Efficiency and Emissions Research (DEER) Conference; Dearborn; Michigan; 2008.
[15] J. Ringler; et al.; "Rankine cycle for waste heat recovery of IC engines;" SAE International Journal of Engines; vol. 2; p. 67; 2009.
[16] M. J. Moran and H. N. Shapiro; Fundamentals of Engineeering Thermodynamics; USA: John Wiley & Sons; 4th ed.; 2000; pp. 281-283.
[17] Y. A. Cengel; et al.; Fundamentals of Thermal-Fluid Sciences; McGrawHill; 3rd ed.; 2008; pp. 337-339.
[18] S. N. H. Rubaiyat and S. Bari; "Waste heat recovery using shell and tube heat exchanger from the exhaust of an automotive engine;" in 13th Asian Congress of Fluid Mechanics; Gazipu; Bangladesh 2010.
