Modeling a Mains connected PWM Converter with Voltage-Oriented Control

Anton Haumer
AIT Austrian Institute of Technology GmbH, Austria

Christian Kral
AIT Austrian Institute of Technology GmbH, Austria

Ladda ner artikelhttp://dx.doi.org/10.3384/ecp11063388

Ingår i: Proceedings of the 8th International Modelica Conference; March 20th-22nd; Technical Univeristy; Dresden; Germany

Linköping Electronic Conference Proceedings 63:42, s. 388-397

Visa mer +

Publicerad: 2011-06-30

ISBN: 978-91-7393-096-3

ISSN: 1650-3686 (tryckt), 1650-3740 (online)


The majority of industrial controlled induction machine drives are connected to the mains via a diode bridge. However; if reduction of harmonic currents and / or regenerative operation is desired; replacing the diode bridge by an active front-end (AFE) is required. This paper describes two models of an AFE: a power balance model disregarding switching effects; and an ideal switching model of a pulse width modulation (PWM) converter. Both models are controlled utilizing space phasors in a voltage oriented reference frame. Voltage oriented control (VOC) of the mains converter can be compared with field oriented control (FOC) of a machine converter. Design and parametrization of the main parts—synchronization with mains voltage; current controller and DC voltage controller—are described in detail. Additionally; simulation results proving the implementation and demonstrating possible investigations as well as an outlook on further enhancements are presented.


Active Front-End; PWM Converter; Voltage-Oriented Control


[1] J. V. Gragger; H. Giuliani; C. Kral; T. Bäuml; H. Kapeller; and F. Pirker; “The SmartElectricDrives Library – powerful models for fast simulations of electric drives;” The 5th International Modelica Conference; pp. 571–577; 2006.

[2] M. Malinowski; M. Kazmierkowski; and A. Trzynadlowski; “Review and comparative study of control techniques for three-phase pwm rectifiers;” Mathematics and Computers in Simulation; vol. 63; p. 349–361; 2003. doi: 10.1016/S0378-4754(03)00081-8.

[3] M. Malinowski; M. P. Kazmierkowski; and A. M. Trzynadlowski; “A comparative study of control techniques for pwm rectifiers in ac adjustable speed drives;” IEEE Transactions On Power Electronics; vol. 18; no. 5; pp. 1390–1396; May 2003. doi: 10.1109/TPEL.2003.818871.

[4] S. L. Sanjuan; “Voltage oriented control of threephase boost pwm converters;” Master’s thesis; Chalmers University of Technology; Gothenburg; 2010.

[5] F. Blaabjerg; R. Teodorescu; Z. Chen; and M. Liserre; “Power converters and control of renewable energy systems;” International Conference on Power Electronics; ICPE 2004; pp. 2–20; 2004.

[6] T. Østrem; “Reliable electric power conversion for connecting renewables to the distribution network;” Ph.D. dissertation; Norwegian University of Science and Technology; 2008.

[7] S. E. Evju; “Fundamentals of grid connected photovoltaic power electronic converter design;” Master’s thesis; Norwegian University of Science and Technology; 2007.

[8] J. V. Gragger; A. Haumer; C. Kral; and F. Pirker; “Efficient analysis of harmonic losses in PWM voltage source induction machine drives with Modelica;” International Modelica Conference; 6th; Bielefeld; Germany; pp. 593–600; 2008.

[9] A. Boglietti; G. Griva; M. Pastorelli; F. Profumo; and T. Adam; “Different PWM modulation techniques indexes performance evaluation;” IEEE International Symposium on Industrial Electronics; ISIE’93 - Budapest.; pp. 193–199; 1993.

[10] F. D. Freijedo; J. Doval-Gandoy; O. Lopez; C. Martinez-Penalver; A. G. Yepes; P. Fernandez-Comesana; J. Malvar; A. Nogueiras; J. Marcos; and A. Lago; “Grid-synchronization methods for power converters;” 35th Annual Conference of IEEE Industrial Electronics; IECON 2009; pp. 522–529; 2009.

[11] A. Nagliero; R. A. Mastromauro; M. Liserre; and A. Dell’Aquila; “Synchronization techniques for grid connected wind turbines;” 35th Annual Conference of IEEE Industrial Electronics; IECON 2009.; pp. 4606–4613; 2009.

[12] A. Timbus; R. Teodorescu; F. Blaabjerg; and M. Liserre; “Synchronization methods for three phase distributed power generation systems. an overview and evaluation;” IEEE 36th Power Electronics Specialists Conference; PESC 2005.; pp. 2474 – 2481; 2005.

[13] T. Østrem; W. Sulkowski; L. E. Norum; and C. Wang; “Grid connected photovoltaic (pv) inverter with robust phase-locked loop (pll);” IEEE PES Transmission and Distribution Conference and Exposition Latin America; 2006.

[14] M. C. Benhabib; F.Wang; and J. L. Duarte; “Improved robust phase locked loop for utility grid applications;” 13th European Conference on Power Electronics and Applications; EPE 2009; pp. 1–8; 2009.

Citeringar i Crossref