Konferensartikel

Luciano Endler
Laboratory of Hydraulic and Pneumatic Systems, Mechanical Engineering Department, Federal University of Santa Catarina, Florianopolis, Santa Catarina, Brazil

Victor Juliano De Negri
Laboratory of Hydraulic and Pneumatic Systems, Mechanical Engineering Department, Federal University of Santa Catarina, Florianopolis, Santa Catarina, Brazil

Eug ênio B. Castelan
Automation and Systems Department, Federal University of Santa Catarina, Florianopolis, Santa Catarina, Brazil

Ladda ner artikelhttp://dx.doi.org/10.3384/ecp1392a48

Ingår i: 13th Scandinavian International Conference on Fluid Power; June 3-5; 2013; Linköping; Sweden

Linköping Electronic Conference Proceedings 92:48, s. 485-494

Publicerad: 2013-09-09

ISBN: 978-91-7519-572-8

ISSN: 1650-3686 (tryckt), 1650-3740 (online)

[1] S V Krichel; O Sawodny; S Hülsmann; S Hirzel; and R Elsland. Exergy flow diagrams as novel approach to discuss the efficiency of compressed air systems. In Proceedings 8th International Fluid Power Conference Dresden; 2012.

[2] R Guenter; E A Perondi; E D DePieri; and A C Valdiero. Cascade controler pneumatic position systems with lugre model based friction compensation. Journal of the Braz. Soc. of Mech. Sci. & Eng.; 28:48–57; 2006.

[3] A C Valdiero; D Bavaresco; and P L Andrighetto. Experimental identification of the dead in proportional directional pneumatic valves. International Journal of Fluid Power; 27:27–34; 2008.

[4] P L Andrighetto; A C Valdiero; and L Carlotto. Study of the friction behavior in industrial pneumatic actuator. ABCM Symposium Series in Mecatronics ed Rio de Janeiro; 2:369–376; 2006.

[5] A Yang; J Pu; C B Wong; and P Moore. By-pass valve control to improve energy efficiency of pneumatic drive system. Control Engineering Pratice; 17:623–628; 2009.

[6] X Shen and M Gouldfard. Energy saving in pneumatic servo control utilizing interchamber cross-flow. Journal of Dynamic Systems; Measurement; and Control; 129:303–310; 2007.

[7] K A Al-Dakkan; M Gouldfard; and E G Barth. Energy saving control for pneumatic servo systems. In Proceedings
of the 2003 IEEE/ASME International Conference on Advanced Inelligent Mechatronics (AIM 2003); volume 1; pages 284–289; 2003.

[8] X Brun; D Thomasset; and E Bideaux. Influence of the process on the control strategy: application in electropneumatic field. Control Engineering Pratice; 10:727–725; 2002.

[9] J Hepke and J Weber. Improving energy efficiency of pneumatic handling systems. In Proceedings 8th International Fluid Power Conference Dresden; 2012.

[10] Y E Assaf and V J De Negri. Development of a high power pneumatic servo-positioning system for speed governors of hydraulic turbines. In Proceedings of the 19th International Congress of Mechanical Engineering; COBEM; Brasilia; Brazil; 2007.

[11] Y E Assaf and L G Oliveira V J De Negri. Applicability of servo-pneumatic positioning systems for high loads. In Bath/ASME Symposium on Fluid Power and Motion Control (FPMC 08); Bath; UK; 2008.

[12] ISO 6358. Pneumatic fluid power - component using compressible fluids. determination of flow rate caracteristics. 1989.

[13] C C Locateli; V J De Negri; and E R De Pieri. A servo-pneumatic positioning system driven by fast switching on/off valves. In Proceedings of the ASME 2011 Dynamic Systems and Control Conference and Bath/ASME Symposium on Fluid Power and Motion Control; volume 2; pages 303–310; 2011.

[14] G F Franklin; J D Powell; and A Emani-Naeini. Feedback Control of Dynamic Systems. Prentice Hall; 1994.

[15] C C Locateli. Modelagem e desenvolvimento de um sistema de controle de posição pneumático com acionamento por válvulas on/off.Master’s thesis; Universidade Federal de Santa Catarina; Florianópolis; 2011.