Michael Winter
Institute for Energy Conversion Technology, Technische Universitaet Muenchen, Germany
Sascha Moser
Institute for Energy Conversion Technology, Technische Universitaet Muenchen, Germany
Stefan Schoenewolf
Institute for Energy Conversion Technology, Technische Universitaet Muenchen, Germany
Julian Taube
Institute for Energy Conversion Technology, Technische Universitaet Muenchen, Germany
Hans-Georg Herzog
Institute for Energy Conversion Technology, Technische Universitaet Muenchen, Germany
Ladda ner artikel
http://dx.doi.org/10.3384/ecp15118479Ingår i: Proceedings of the 11th International Modelica Conference, Versailles, France, September 21-23, 2015
Linköping Electronic Conference Proceedings 118:51, s. 479-484
Publicerad: 2015-09-18
ISBN: 978-91-7685-955-1
ISSN: 1650-3686 (tryckt), 1650-3740 (online)
Nowadays, power electronic systems play a major role in almost every large system. Due to the high switching frequencies, the simulation of these devices is computationally very expensive and not suitable for system simulation. Average models of these power electronic systems are needed to simulate the basic terminal characteristics of these devices without the need to simulate every switching operation. This paper describes a Modelica implementation of a synchronous half-bridge converter for the use in an automotive power net simulation as well as in real-time environments. The model takes into account the losses in the semiconductors as well as the dynamic behavior of the converter. For the parametrization of the model, only the switching frequency and some values from the datasheets of the used components are required. To validate the proposed model, an equivalent SPICE model is developed, serving as a reference model. The dynamic behavior of the two models is compared using step responses of the load current. The relative deviation of the model’s output voltage compared to the SPICE simulation is less than 2%. Furthermore, also the energetic behavior was investigated, and it is shown that the proposed model provides good results for a wide operating area.
Coilcraft. Datasheet - Shielded Power Inductors - SER2900, 2014.
Robert W. Erickson and Dragan Maksimovic. Fundamentals of power electronics. Kluwer Academic, Norwell, Mass., 2nd ed edition, 2001. ISBN 0-306-48048-4.
Harald Giuliani, Claus-J. Fenz, Anton Haumer, and Hansjörg Kapeller. Simulation and validation of power losses in the buck-converter model included in the smartelectricdrives library. In The 8th International Modelica Conference, Technical Univeristy, Dresden, Germany, Linköping Electronic Conference Proceedings, pages 369–374. Linköping University Electronic Press, 2011.
J. S. Glaser, F. E. Cellier, and A. F. Witulski. Objectoriented power system modeling using the dymola modeling language. In PESC ’95 - Power Electronics Specialist Conference, pages 837–843, 1995. doi: 10.1109/PESC.1995.474914.
Johannes Gragger. Computation time efficient models of dc-to-dc converters for multi-domain simulations. In Matthias Schmidt, editor, Advances in Computer Science and Engineering. InTech, 2011. ISBN 978-953-307-173-2. doi: 10.5772/15813.
Infineon. Datasheet IPP052N08N5, 2014.
Marian Kazimierczuk. Pulse-width modulated DC-DC power converters. Wiley, Chichester, U.K., 2008. ISBN 978-0-470-77301-7.
Tom P. Kohler, Thomas Wagner, Andreas Thanheiser, Christiane Bertram, Dominik Buecherl, Hans-Georg Herzog, and Joachim Froeschl. Experimental investigation on voltage stability in vehicle power nets for power distribution management. In 2010 IEEE Vehicle Power and Propulsion Conference (VPPC), pages 1–6, 2010. doi: 10.1109/VPPC.2010.5729168.
Kristin Majetta, Sandra Böhme, Christoph Clauß, and Peter Schneider. Msl electrical spice3 - status and further development. In The 8th International Modelica Conference, Technical Univeristy, Dresden, Germany, Linköping Electronic Conference Proceedings. Linköping University Electronic Press, 2011.
On Semiconductor. Datasheet - MBR20100CT - Switchmode Power Rectifiers, 2015.
Florian Ruf, Alexander Neiss, Andreas Barthels, Tom P. Kohler, Hans-Ulrich Michel, Joachim Froeschl, and Hans-Georg Herzog. Design optimization of a 14 v automotive power net using a parallelized direct algorithm in a physical simulation. In 13th International Conference on Optimization of Electrical and
Electronic Equipment (OPTIM), 2012.
Florian Ruf, Markus M. Schill, Andreas Barthels, Tom P. Kohler, Hans-Ulrich Michel, Joachim Froeschl, and Hans-Georg Herzog. Topology and design optimization of a 14 v automotive power net using a modified discrete pso in a physical simulation. In 2013 IEEE Vehicle Power and Propulsion Conference (VPPC), pages 1–7, 2013. doi: 10.1109/VPPC.2013.6671740.
Texas Instruments. UCC2721x 120-V Boot, 4-A Peak, High Frequency High-Side and Low-Side Driver (Rev. F), 2014.
Vishay. DC-to-DC Design Guide. Vishay Siliconix, 2002.
